• Kits include all of the necessary components to repair a carburetor
• Kits include all O-rings, gaskets, jets, needle, mixture screw, float bowl screws, float valve needle and seat (needle jet and other pressed in jets are not included in kit)
• OEM jet sizes are included in the kit (KTM and Husqvarna kits do not include jets or slide needle standard jetting sizes are not provided by the factory)
• NBR rubber material is used on all O-rings and rubber gaskets; NBR has excellent resistance to the ethanol used in today's fuels
• Applications that use paper float bowl gaskets are upgraded to High Performance Interface Gasket material
• Components included in the kits are based off of US models and discretion must be used when attempting to install the kit on a non-US model

(1) Float bowl gasket

(1) Spring

(1) Small flat washer

(3) O-Rings

(1) Jet needle 

(1) Float valve

(1) 2nd Main jet #128

(1) Pilot jet #35

(1) Pilot air screw

(4) #8-32 x 5/8" Pan head bolts

(4) #8-32 x 11/16" Pan head bolts

No instructions

The Air Resources Board (ARB) does not permit the use of aftermarket emission-related parts that alter the air/fuel ratio of an emission-controlled vehicle. Due to these legal restrictions this part cannot be shipped to California.