(For models listed w/ABS)

• The simple way to complete a handlebar swap
• Kits give you the correct length stainless braided cables and brake lines you need so you can complete a handlebar swap, install the new cables/brake lines and ride
• Throttle-by-wire (TBW) kits include clutch cable, brake lines, chrome T brake line junction, banjo bolts, fittings and copper crush washers
• Includes wire extensions
• Made in the U.S.A.
  
  Included Items:
  (1) Clear vinyl clutch cable, measures 75 1/4 in. housing and 2 7/8 in. travel
  (1) Black plastic barrel
  (1) Black rubber boot
  (1) 58 1/2 in. clear brake line with (1) 3/8 in./10mm straight banjo and (1) 45 degree 3/8 in.-24 inverted flare fitting
  (1) 76 1/4 in. clear brake line with (1) 3/8 in./10mm 25 degree banjo and (1) 3/8 in./10mm straight banjo
  (2) 22 1/4 in. clear brake lines with (1) 3/8 in.-24 inverted flare fitting
  (1) chrome 3/8 in. inverted flare junction block
  (3) 3/8 in.-24 banjo bolts
  (6) 3/8 in./10mm brass crush washers
  (26) 24 in. wires
  (2) 18 in. heat shrink tubing
  (2) 20 in. heat shrink tubing
  (26) Male spade connector
  (1) 18 in. 6 wire harness
  (1) 12 in. heat shrink tubing
  (1) 73 in. black braided cable wrap
  Instructions