• Features a two-piece motor plate design and 2" primary belt
• 52/69 pulley combination for a 1.32:1 final drive ratio
• Belt profiles are unique to each kit, requiring matched pulleys for each belt; pulleys may not be interchanged
• Front pulley face and spring collar have a matching pattern to the rear pulley
• Front pulley cover is counter-bored for a super-clean appearance
• Diaphragm clutch is a 6-bolt configuration for a more firm feel and improved appearance
• Kits include side and top guard for an aggressive, open dome look
• Springs and spring collar are enhanced for more positive lock-up engagement, great for big-inch/high-horsepower motors
• Ball bearing pressure plate
• Made in the U.S.A.

Note: Fits models listed w/hydraulic clutch

(1) Clutch hub and basket assembly

(1) Motor sprocket/pulley

(2) Inner primaries

(3) Belt guards

(1) Black aluminum open dome pulley cover W/(5) #10-24 x 1/4" tapered flat head bolts

(1) Push rod assembly

(1) Retaining ring

(1) Short shift shaft cone

(1) Long shift shaft cone

(6) 5/16"-18 x 3/4" Socket cap head bolts

(5) 5/16"-18 x 1-1/2" Socket cap head bolts

(5) 1/4"-20 x 1" Socket cap head bolts

(1) 3/4"-18 Left hand thread hex nut

(1) Short copper bushing

(1) Long copper bushing

(2) Wave washers

(4) Shims

(1) 9/16"-12 x 3-1/4" Hex head front pulley bolt

(1) 9/16" Flat washer

(2) Large flat washers

(1) 5/16"thick Flat washer

(1) 1/4"thick Flat washer

(1) 2" Drive belt

(2) 1/2"-13 Set screws

(2) 1/2"-13 Internal threaded sleeves

(1) 1/4"-20 x 1-1/2" Set screw

(4) 1/4"-20 x 5/8" Button head bolts

(2) 1/2"-13 x 1" Button head bolts

(2) 1/4"-20 Internal threaded sleeves

Instructions