NOTE: Some models require drilling extra hole(s) in skis to mount carbides NOTE: Wear rods replace the originals exactly on all models except those with E-Z Steer either as original equipment or installed later. For those models, the wear rods listed replace both the plate and the 2-stud, 14-3/4 in. wear rod with a 3-stud, 28 in. design. If you wish to retain the E-Z Steer plate, order part number 10533 for an X-Calibar I or part number 10610 for an X-Calibar III Plus design with 5 in. or 60º carbide. Both are 14-3/4 in. long Dimensions: Length/Diameter: 20-1/2 in./7/16 in. Stud Diameter/Length: 5/16 in./7/8 in. Number of Studs: 4 Stud Center Mounting Distance From: Front to 1st: 6-1/2 in. 1st to 2nd: 3 in. 2nd to 3rd: 6-1/2 in. 3rd to 4th: 3-1/2 in. 4th to End: 1 in. |
Degree of Carbide | 60 Degree |
---|---|
Diameter | 5/16 in. |
Diameter | 7/16 in. |
Length - Carbide | 4 in. |
Mfg #: | 505-618 |
Part #: | 03476 |
Stud Count | 4 |
Type | Carbide |
Units | Pair |
Weight | 2.18 lbs |
Part 03476 fits the following machines