• From Sno-Stuff, the original X-Calibar carbide wear rods
• Bars feature various lengths of 60º center carbide for control, hardweld filler sections for durability, and some have carbide wear pads for even more wear resistance
• Longer studs work with ski skins
• X-Calibar II feature four inches of 60º center carbide
• One-inch carbide pads front and rear
• Hardweld filler between front and rear carbide for added wear resistance

NOTE: Some models require drilling extra hole(s) in skis to mount carbides

NOTE: Wear rods replace the originals exactly on all models except those with E-Z Steer either as original equipment or installed later. For those models, the wear rods listed replace both the plate and the 2-stud, 14-3/4 in. wear rod with a 3-stud, 28 in. design. If you wish to retain the E-Z Steer plate, order part number 10533 for an X-Calibar I or part number 10610 for an X-Calibar III Plus design with 5 in. or 60º carbide. Both are 14-3/4 in. long

(2) Carbides

(4) 5/16"-18 Nylock nuts

No instructions

Dimensions:
Length/Diameter: 24-3/4" / 7/16"
Stud Diameter/Length: 5/16" / 1-3/8"
Number of Studs: 2
Stud Center Mounting Distance From:
Front to 1st: 12-3/4"
1st to 2nd: 9-1/2"
2nd to End: 2-3/8"