NOTE: S&S Super E and G carburetors require the use of a two-cable, pull open-pull closed throttle assembly. If your bike is not equipped with one, a two-cable system must be purchased separately. Included Items: (1) Chrome air cleaner cover (1) Air filter (1) 7" Breather hose (2) Spring clamps (1) Small hose clamp (2) Breather fittings (2) 5/16"-18 x 3/8" Internal torx head bolts (2) Breather bolts (1) Chrome fast idle lever (3) 1/4"-20 x 1/2" Socket cap bolts (2) Set screws (3) 1/4"-20 x 1" Tapered head bolts (2) Nylon washers (1) Flat washer (1) Spring washer (1) Brass washer (2) #10-24 x 1/4" Slotted head bolts (10) Flat washers (1) Carburetor assembly (1) Manifold (1) 12" Fuel line insulator (1) 24" Clear overflow hose (1) 17-1/2" Fuel line (2) O-Rings (1) Manifold insulator block (1) Backplate gasket (2) Hose clamps (2) 3/8"-16 x 1-1/4" Socket cap bolts (1) Chrome throttle cable guide (1) Jet #074 (1) Jet #082 (1) Jet #080 (1) Jet #076 (1) Jet #078 (1) Jet #072 (1) Jet #031 (1) Jet #0295 Instructions The Air Resources Board (ARB) does not permit the use of aftermarket emission-related parts that alter the air/fuel ratio of an emission-controlled vehicle. Due to these legal restrictions this part cannot be shipped to California. |
Mfg #: | 11-0451 |
---|---|
Part #: | H16107 |
Type | Carburetor - Butterfly |
Units | Kit |
Weight | 6.80 lbs |
Part H16107 fits the following machines