Roetin Performance X-10 Two Carbide Wear Rods - X10KT464

    Roetin Performance X-10 Two Carbide Wear Rods - X10KT464

    Make sure this fits your ride
    Item is no longer available
    (0) Options available
    Returns not accepted on open box items
    Roetin Performance X-10 Two Carbide Wear Rods

    • Six inches of 90° carbide on 7/16 in. bar
    • Two carbide wear pads
    • Hardweld filler, complete
    • Set of four

      NOTE:
      Some models require drilling extra hole(s) in skis to mount carbides. Dennis Kirk recommends removing any paint from the studs before use by wire-brushing.

      4-Runner kit. 2 runners with 4 in. of carbide and 2 runners with 6 in. of carbide. Install longer carbides to outer side of skis

      Control carbides are 90-degrees, the 4' carbides include 3" of carbide wear pads on the front, and the 6' have 2" of carbide wear pads. Neither has any hardweld filler.

      Dimensions:
      Length/Diameter: 13-1/8 in./7/16 in.
      Stud Diameter/Length: 5/16 in./2 in.
      Number of Studs: 2
      Stud Center Mounting Distance From:
      Front to 1st: 3-1/2 in.
      1st to 2nd: 6-1/2 in.
      2nd to End: 3-1/8 in.
    Specifications
    Degree of Carbide 90 Degree
    Diameter 5/16 in.
    Diameter 7/16 in.
    Length - Carbide 6 in.
    Mfg #: X10KT464
    Part #: 032019
    Type Carbide
    Units Set of 4
    Weight 2.90 lbs
    Vendor Part Number(s):
    46120095
    Alternate/OEM Part Number(s):
    46120095
    Fitment for Roetin Performance X-10 Two Carbide Wear Rods

    Part 032019 fits the following machines

    Ski-Doo
    Reviews & Questions