These bars are the latest offering from Santee

• Feature a "swedge" which means you get a smooth transition from the 1.25 in. diameter to the 1 in. area for mounting the OEM or any custom hand controls with 1 in. mounts
• This taper also allows you to rotate the control to any angle for both clearance and optimum comfort
• Constructed of steel tubing and CNC bent for smooth lines
• Comes pre-drilled and with a pull-wire already installed in the bars so pulling your wire harness through the bars will be much faster and easier

Dimensions:
Width - 37 1/2 in.
Rise - 16 in.
Pullback - 12 in.
Center Width - 12 in.
End Rise - 17 in.
1 in. Diameter Clamping Width - 5 in.
Inside Width of Knurling/Outside - 2 1/2 in. / 4 1/2 in.
Drilled for Internal Wiring - YES
Dimpled to Prevent Pinching Control Wires - NO
Three Notches for 08-up HD w/Electronic Throttle - YES