S&S Cycle EZ Start 551 Chain-Driven Cam - 106-5293

    S&S Cycle EZ Start 551 Chain-Driven Cam - 106-5293

    MSRP: $540.95

    Price: $486.86 10% off!
    Make sure this fits your ride
    Ships Free
    Ships In 4-5 Business Days

    (0) Options available
    Returns not accepted on open box items
    S&S Cycle EZ Start 551 Chain-Driven Cam
      • Start any engine regardless of displacement or compression ratio with a stock starter
      • Save your starter and battery; tested for 10,000 starts without running battery down
      • Spring-loaded lobe in cam allows for easy start by initially reducing crank compression, but once the engine starts and rpm increases, the compression release lobe is centrifugally retracted and the engine runs normally, with full compression, and without any loss in performance
      • Available in chain drive and gear drive versions



    551 EZ CAMS

    • Optimized for 88/96 in. to 106 in. Touring bikes with slip-on mufflers and 9.0 to 10.0:1 compression
    • Best bolt-in cam available for Dressers
    • Can be used with stock pushrods, springs and lifters
    • Pulls hard from idle to 4000 rpm


    Intake:
    Open: 15 degree
    Close: 20 degree
    Duration @ .053 in.: 215 degree
    Valve Lift: .550 in.

    Exhaust:
    Open: 39 degree
    Close: 18 degree
    Duration @ .053 in.: 237 degree
    Valve Lift: .550 in.



    Included Items:

    (2) Cam bearings

    (1) Cover gasket

    (1) Retaining ring

    (2) Cam shafts

    (1) 5/16-18x3/4" Hex head bolt

    (2) Bearings

    Instructions



    The Air Resources Board (ARB) does not permit the use of aftermarket emission-related parts that alter the air/fuel ratio of an emission-controlled vehicle. Due to these legal restrictions this part cannot be shipped to California.

    Mfg. Price Controlled Item
    Due to the manufacturer's advertising policy - this item is excluded from promotions and discounts details
    Specifications
    Mfg #: 106-5293
    Part #: 141253
    Type Cam
    Type Camshaft
    Units Kit
    Weight 3.85 lbs
    Vendor Part Number(s):
    09250521
    Resources & Manuals
    Fitment for S&S Cycle EZ Start 551 Chain-Driven Cam

    Part 141253 fits the following machines

    Harley-Davidson

    Associated

    You May Also Be Interested In

    Reviews & Questions