The Winter Power Package is the ideal combination of performance and savings to transform your Twin Cam HD without breaking the bank. Bump the early Twin Cam from 88ci to 100ci as well as adding matched cams/cam plate/oil pump and everything else a high performance cam chest needs to reliably make big power. Good only from November 1-February 28 2017, so get yours now and schedule that winter install. Specifications
Features & Benefits
DISCLAIMER: NOT LEGAL FOR SALE OR USE IN CALIFORNIA ON ANY POLLUTION CONTROLLED MOTOR VEHICLE. Not legal for sale or use on any EPA pollution controlled motor vehicle. NOTE: S&S TC3 oil pumps and cam support plates for 1999-’16 Harley-Davidson® big twin engines are machined from aluminum forgings. This provides the strength and dimensional stability of a billet part, and eliminates voids, inclusions, and other structural defects associated with castings. Due to the material used and the as-forged texture of the parts, there may be some variation in the color of the blue anodized finish. This does not constitute a defect. Despite variations in color, the ability of the anodized coating to protect the parts is unchanged. You may install these products with confidence, knowing that they will function as they are intended
Included Items: (2) Bore cylinders (4) Spacers (2) Pistons (2) Wrist pins (2) Top rings (2) Second rings (4) Oil rings (2) Spacer rings (4) Retaining clips (1) Retaining tool (1) "V" Spring (2) Head gaskets (2) Cylinder base O-rings (2) Cylinder base dowel O-rings (2) Exhaust gaskets (1) Blue steel cam support plate (16) O-ring (1) Cam cover gasket (2) Lifter cover gasket (2) Cam shaft bearing (1) Spacer (4) Pushrod assembly (4) Chrome aluminum pushrod covers (1) 20x42x11 Bearing (1) 20x42x12 Bearing (1) Flat washer (1) Retaining ring (1) Inner cam chain tensioner assembly (1) Outer cam chain tensioner assembly (2) 1/4"-20 x 1-1/8" Button head bolt (2) 1/4"-20 x 3/4" Button head bolt (1) Rear chain drive camshaft (1) Front chain drive camshaft (1) Blue aluminum oil pump body assembly (2) Tube engine assembly lube (3) #243 Threadlocker (2) #262 Threadlocker (1) Bearing retention plate (4) 8-32 x 3/8" Pan head bolt (1) 1/4"-20 X 3/8" Button head bolt (4) Tappet (4) 1/4"-20 x 2" Socket head bolt (4) 1/4" Flat washer Instructions
The Air Resources Board (ARB) does not permit the use of aftermarket emission-related parts that alter the air/fuel ratio of an emission-controlled vehicle. Due to these legal restrictions this part cannot be shipped to California. |
Mfg #: | 330-0578 |
---|---|
Part #: | 1400809 |
Type | Top End Kit w/Cylinder |
Units | Each |
Weight | 41.65 lbs |
Part 1400809 fits the following machines