• Original S&S teardrop air cleaner assemblies
• Include an S&S cover, backing plate and high-quality filter element and hardware kit
• Increase horsepower with no other changes
• Available for most OEM carburetors and S&S performance intake systems
• Made in the U.S.A.

NOTE:

• Installation of an S&S air cleaner may require re-jetting or engine re-tuning, however tuning within the OEM emissions standards is required to maintain E.O. validity.
• Some applications exempt per CARB EXECUTIVE ORDER (E O) # D-355-21. EO applies 01-17 EFI models only.

The Air Resources Board (ARB) does not permit the use of aftermarket emission-related parts that alter the air/fuel ratio of an emission-controlled vehicle. Due to these legal restrictions this part cannot be shipped to California.

(1) Black aluminum teardrop air cleaner cover

(1) Air filter

(1) Adaptor plate assembly

(1) Chrome backplate

(2) Chrome support brackets

(2) Vent hoses

(1) Backplate gasket

(1) Adaptor plate gasket

(2) Breather bolts

(2) Breather fittings

(2) Cable ties

(2) Spring clamps

(1) 5/16"-18 x 1-1/4" Hex head bolt

(2) Back plate screws

(3) 1/4"-20 x 1" Countersunk oval head bolts

(1) 5/16"-18 x 1" Countersunk flat head bolt

(6) 1/4"-20 x 1/2" Socket head bolts

(2) 5/16" Flat washers

(2) 5/16" Nylock nuts

(13) Shims(assorted sizes)

(3) Spacers(assorted sizes)

Instructions