S&S Cycle Forged High Compression Piston Kit (.010") - 106-5504

    S&S Cycle Forged High Compression Piston Kit (.010") - 106-5504

    Make sure this fits your ride
    Item is no longer available
    (0) Options available
    Returns not accepted on open box items
    S&S Cycle Forged High Compression Piston Kit (.010")
    • Forged "high compression" pistons for 74" stock motors with 3.4375" bore and 3.9687" stroke
    • 9:1 compression ratio
    • All piston kits come with two pistons, rings, wrist pins, and wrist pin keepers
    • Compression ratios listed are approximate and are calculated using the correct length cylinders as specified by S&S
    • Require the use of connecting rods with a rod length of 7.440" (standard length OEM #24281-74A connecting rods); use of earlier connecting rods with a rod length of 7.470" (OEM #24281-41A) will result in a slight increase in the compression ratio of about 1/2 point, and may also result in clearance problems (check all piston to cylinder head clearances carefully when using the early style rods)

    NOTE:  Since many older motorcycles have been modified, be sure to confirm that your engine is still stock before ordering replacement pistons. Using 80" pistons with 74" (3 31/32" stroke) flywheels will result in very low compression and poor performance. Using 74" pistons with 80" (4 1/4" stroke) flywheels will result in contact between piston and cylinder head, and potential engine damage.

     

     

    Mfg. Price Controlled Item
    Due to the manufacturer's advertising policy - this item is excluded from promotions and discounts details
    Specifications
    Bore Size 3.4475 in.
    Compression Ratio 9:1
    Mfg #: 106-5504
    Part #: 1334831
    Type Piston Kit
    Units Each
    Weight 0.00 lbs
    Vendor Part Number(s):
    09101928
    Fitment for S&S Cycle Forged High Compression Piston Kit (.010")

    Part 1334831 fits the following machines

    Harley-Davidson
    Reviews & Questions