• Swept forward, 2-into-1 design rams additional air into the cylinder
• Natural supercharging effect increases mid-range torque
• Nearly twice the filter area of a teardrop air cleaner
• Feature chrome runner and bracket (except where noted), backing plate, filters and hardware
• Made in the U.S.A.

FITMENT NOTE:
For S&S motors with 4 1/8 in. bore and S&S single bore fuel-injection

NOTE:
Single bore tuned induction will not fit on motorcycles with fairing lower glove boxes

NOTE:
Tuned induction systems does not fit Dyna Wide Glide models due to runner to gas tank interference

(2) Air filters with clamps
(1) Throttle body
(1) Intake assembly
(2) Gaskets
(1) O-ring
(3) 1/4"-20 x 1/2" tapered head bolts
(2) 5/16"-18 x 1 1/4" button head bolts
(2) 3/8" flat washers
(2) 1/4" ID 90 degree breather hoses
(2) 5/16-18 x 1/2" tapered head bolts
(3) 1/4"-20 x 1/2" socket head bolts
(12) 5/16" shims
(3) Breather plugs
(1) Tube threadlocker

The Air Resources Board (ARB) does not permit the use of aftermarket emission-related parts that alter the air/fuel ratio of an emission-controlled vehicle. Due to these legal restrictions this part cannot be shipped to California.