• Kits include all of the necessary components to repair a carburetor
• Models with multiple carburetors include components to repair all carburetors
• Kit includes all necessary O-rings, gaskets, jets, needle, mixture screw, float bowl screws, float valve needle and seat (needle jet and other pressed-in jets are not included in kit)
• OEM jet sizes and slide needles are included in the kit
• NBR rubber material is used on all O-rings and rubber gaskets; NBR has excellent resistance to the ethanol used in today's fuels
• Applications that use paper float bowl gaskets are upgraded to High Performance Interface Gasket material
• Components included in the kits are based off of U.S. models and discretion must be used when attempting to install the kit on a non-U.S. model

(3) Float chamber gaskets

(3) Funnel assembly cover gaskets

(3) Top carburetor gaskets

(3) O-Rings

(3) Small rubber washers

(3) Jet needles

(3) Needle valves

(3) Adjusters

(3) Pilot jets #35

(2) Starter jets #155

(2) Main jets #360

(2) Air pilot screw #1.0

(3) Springs

(6) Flat washers

(3) "E" Clips

(3) Small pan head pan bolts W/flat washers

(6) Shoulder bolts

(18) 5mm-.80 x 12mm Pan head bolts W/split lock washers

No instructions

The Air Resources Board (ARB) does not permit the use of aftermarket emission-related parts that alter the air/fuel ratio of an emission-controlled vehicle. Due to these legal restrictions this part cannot be shipped to California.