Kit includes Note: For use with stock throttle bodies/ carburetors and Rev2 throttle assembly only. IMPORTANT - Rev2 does not have the starter and kill switch wiring or switches that are built into your stock throttle assembly. The use of Rev2 throttle requires and aftermarket kill switch and starter button assembly (21-7859) not included in the kit. Rev2 kits have cables specifically designed for fitment on specific models, but the Rev2 throttle itself is not model specific. Therefore, in some situations, the Rev2 kit may not be direct bolt on installation due to space limitations on the stock handlebar. In some installations, it may be necessary to move other control components on the stock handlebar, shorten the Rev2 throttle tube and grip, install longer aftermarket handlebars or possibly all of the above. It is up to the end user to determine the best method for fitment on their motorcycle, and ensure that the Rev2 kit is installed properly and with the correct clearances for safe operation. Installation should be done by a qualified mechanic and carefully checked for proper function. WARNING: Improper installation could result in great bodily injury or death. Note: For use with stock throttle bodies. Stock reel is 33.4 mm. IMPORTANT - The stock twist throttle assembly on this model incorporates an on/off switch, mode switch, and starter button. The Motion Pro 21-7859 accessory switch only has an on/off switch and starter button, and cannot be used to replace the original switching functions on the stock throttle assembly. In order to install the Rev2 kit and retain all the necessary switching functions, owners of this model will need to install longer aftermarket handlebars (at least 50 mm longer than stock on the right side) and use the stock throttle assembly mounted behind the Rev2 throttle housing. The stock twist throttle assembly can be modified to remove the throttle reel holder portion and leave just the necessary switches. This modification makes it narrower and uses less space on the handlebar. Rev2 Kits have cables specifically designed for fitment on specific models, but the Rev2 throttle itself is not model specific. Therefore, in some situations, the Rev2 kit may not be a direct bolt on installation due to space limitations on the stock handlebar. In some installations, it may be necessary to move other control components on the stock handlebar, shorten the Rev2 throttle tube and grip, install longer aftermarket handlebars, or possibly all of the above. It is up to the end user to determine the best method for fitment on their motorcycle, and ensure that the Rev2 kit is installed properly and with the correct clearances for safe operation. Installation should be done by a qualified mechanic and carefully checked for proper function. Included Items: (1) Dual cable Housing Length: 25 in. Elbow Length: 1 3/4 in. Elbow Degree: 90 degree Travel: Up to 4 1/4 in./4 3/4 in. (1) Throttle tube (2) 1 in. diameter x 5 in. long black rubber grips (1) Cast aluminum throttle assembly (1) 35mm black cam reel (1) 40mm blue cam reel (1) 45mm red cam reel (1) 50mm yellow cam reel (1) Street/Road race orange cam reel Instructions |
Mfg #: | 01-2726 |
---|---|
Part #: | 1911216 |
Type | Throttle |
Units | Each |
Weight | 1.75 lbs |