Magnum Sterling Chromite II Designer Series Handlebar Installation Kit for use w/18 in.-20 in. Ape Hangers w/ABS - 387583

    Magnum Sterling Chromite II Designer Series Handlebar Installation Kit for use w/18 in.-20 in. Ape Hangers w/ABS - 387583

    Make sure this fits your ride
    Item is no longer available
    (0) Options available
    Returns not accepted on open box items
    Magnum Sterling Chromite II Designer Series Handlebar Installation Kit for use w/18 in.-20 in. Ape Hangers w/ABS
    • This Sterling Chromite II Designer Handlebar Installation Kit for 18" - 20" Ape hanger handlebars.
    • The kit will include a throttle and idle cable, a clutch cable, an ABS brake line (both ABS Designer Lower and ABS Designer Upper Brake Line), copper crush washers, hardware and wiring extensions.
    • All fittings are highly polished and chrome plated.
    • All cables are a low effort, high efficiency design that meets or exceeds all OE specifications for fitment, construction, endurance.
    • Brake lines exceed all DOT FMVSS-106 requirements.
    • Made in the USA

    Note: Kits are based on using ape hanger style handlebars with 2" risers.

     



    Included Items:

    (1) Sterling chromite II clutch cable, measures 78" housing and 3-3/8" travel

    (2) Cable ties

    (1) Plastic barrel

    (1) O-ring

    (1) Sterling chromite II throttle cable, measures 44-1/2" housing, 4" 90-degree elbow, and 5" travel

    (1) Sterling chromite II idle cable, measures 44-1/2" housing, 4" 90-degree elbow, and 4-5/8" travel

    (2) Brass barrels

    (1) 42-1/4" Sterling chromite II brake line W/(1) 3/8"/10mm 35-degree banjo fitting and (1) female AN#3 fitting

    (1) Chrome junction block assembly including (1) 17-1/2" Sterling chromite II brake line W/(1) 3/8"/10mm 55-degree banjo fitting and (1) 10-7/8" Sterling chromite II brake line W/(1) 3/8"/10mm straight banjo fitting

    (1) 7/16" Banjo fitting W/(1) male AN#3 fitting

    (1) 3/8"/10mm Banjo bolt

    (6) 3/8"/10mm Copper crush washers 

    (2) 7/16" Copper crush washers

    (1) Turn signal extension kit including (6) 14-1/2" Wires W/bullet connectors, (2) 14" Shrink tubing, and (6) 2-1/2" Shrink tubing

    (2) 16-1/2" Can-bus wiring harnesses  

    Instructions

    Specifications
    ABS With ABS
    Finish Sterling Chromite II
    Fits Handlebar 18 in.-20 in.
    Mfg #: 387583
    Part #: 1911760
    Type Cable Kit
    Units Each
    Weight 4.10 lbs
    Vendor Part Number(s):
    06620015
    Alternate/OEM Part Number(s):
    06620015
    WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov
    Resources & Manuals
    Fitment for Magnum Sterling Chromite II Designer Series Handlebar Installation Kit for use w/18 in.-20 in. Ape Hangers w/ABS

    Part 1911760 fits the following machines

    Harley-Davidson
    Reviews & Questions