For models listed w/Non ABS
NOTE: Cable and line lengths are based on using 2” risers Included Items: (1) Chrome steel handlebars (1) Clear vinyl stainless steel clutch cable measures 75" long W/ 2-7/8" travel (2) 11" Black cable ties (1) O-Ring (1) White plastic barrel (1) Clear vinyl stainless steel brake line measures 54" long W/(1) 7/16" 35-degree banjo fitting & (1) 3/8"/10mm 90-degree banjo fitting (1) Clear vinyl stainless steel idle cable housing measures 41" W/4-1/2" travel (1) Clear vinyl stainless steel throttle cable housing measures 40-3/4" W/5" travel (2) Brass barrels (2) 14-1/2" Can-bus wiring harness (6) 14-1/2" Colored wire turn signal extensions (6) 2-1/2" Shrink tubes (2) 14" Shrink tubes (2) 7/16" Copper crush washers (2) 3/8"/10mm Copper crush washers Instructions
OFF BIKE DIMENSIONS
Width: 35-3/4" Rise: 16-3/4" Pullback: 9-1/8" Center width: 9" End rise: 15-1/4" 1" diameter clamping width: 5-1/4" Inside width of knurling/outside: 2-1/2"/4-1/2" Drilled for internal wiring: Yes Dimpled to prevent pinching control wires: No Three notches for 08-up h-d w/electronic throttle: Yes |
Center Width | 7 3/4 in. |
---|---|
Description | Knurled |
Description | Notched for Throttle By Wire |
Description | Pre-Drilled |
Diameter - Handlebar | 1 1/4 in. |
End Rise | 15 1/4 in. |
Manufacturer Color | Chrome |
Mfg #: | 38827-116 |
Overall Width | 35 in. |
Part #: | 5901505 |
Pullback/Sweep - Handlebars | 8 in. |
Rise | 16 in. |
Type | Ape Hanger |
Units | Each |
Weight | 14.40 lbs |
Part 5901505 fits the following machines