For models listed w/ABS
NOTE: Cable and line lengths are based on using 2” risers Included Items: (1) Chrome steel handlebars (1) Clear vinyl stainless steel clutch cable measures 71-1/4" long W/2-7/8' travel (2) 11" Black cable ties (1) O-Ring (1) White plastic barrel (1) Clear vinyl stainless steel brake line measures 20" long W/(1) 3/8"/10mm 35-degree banjo fitting & (1) female AN#3 fitting (1) Clear vinyl stainless steel mid line brake measures 50-1/2" long W/(1) 3/8"/10mm banjo fitting & (1) male AN#3 (26) 14-1/2" Colored switch wire extensions (6) 15" Colored throttle by wire wires (32) 2-1/2" Shrink tubes (3) 14" Shrink tubes (10) 3/8"/10mm Copper crush washers (1) Clear vinyl stainless steel brake line measures 41-1/2" W/(2) 3/8"/10mm 90-degree banjo fittings and (1) 59-1/2" line W/(1) 3/8"/10mm 90-degree banjo fitting Instructions
OFF BIKE DIMENSIONS
Width: 36" Rise: 13-1/4" Pullback: 12" Center width: 11" End rise: 11-3/4" 1" diameter clamping width: 6" Inside width of knurling/outside: 2-1/2"/4-1/2" Drilled for internal wiring: Yes Dimpled to prevent pinching control wires: No Three notches for 08-up h-d w/electronic throttle: Yes
|
Center Width | 12 in. |
---|---|
Description | Knurled |
Description | Notched for Throttle By Wire |
Description | Pre-Drilled |
Diameter - Handlebar | 1 1/4 in. |
End Rise | 11 3/4 in. |
Manufacturer Color | Chrome |
Mfg #: | 38831-212 |
Overall Width | 34 3/4 in. |
Part #: | 5901515 |
Pullback/Sweep - Handlebars | 11 1/2 in. |
Rise | 12 in. |
Type | Ape Hanger |
Units | Each |
Weight | 15.30 lbs |
Part 5901515 fits the following machines