(For models listed w/or w/o cruise)

• The simple way to complete a handlebar swap
• Kits give you the correct length stainless braided cables and brake lines you need so you can complete a handlebar swap, install the new cables/brake lines and ride
• Standard kits include throttle cable, idle cable, clutch cable, brake lines, chrome T brake line junction, banjo bolts, fittings and copper crush washers
• Includes wire extensions
• Made in the U.S.A.
  
  Included Items:
  (1) Clear vinyl throttle cable, measures 51 1/4 in. housing, 4 3/8 in. 45 degree elbow and 5 3/8 in. travel
  (2) Brass barrels
  (1) Clear vinyl idle cable, measures 52 1/4 in. housing, 4 3/8 in. 45 degree elbow and 5 1/4 in. travel
  (1) Clear vinyl clutch cable, measures 73 1/2 in. housing and 2 7/8 in. travel
  (1) Black plastic barrel
  (1) Black rubber boot
  (1) 39 3/4 in. clear brake line with (1) 3/8 in./10mm 45 degree banjo and (1) 7/16 in. 90 degree 45 degree 3/8 in.-24 inverted flare fitting
  (2) 22 1/4 in. clear brake lines with (1) 3/8 in./10mm 45 degree banjo and (1) 90 degree 3/8 in.-24 inverted flare fitting
  (1) Chrome 3/8 in. inverted flare junction block
  (3) 3/8 in.-24 banjo bolts
  (6) 3/8 in./10mm brass crush washers
  (1) 73 in. black braided cable wrap
  (26) 24 in. wires
  (1) 18 in. heat shrink tubing
  (2) 20 in. heat shrink tubing
  (26) Male spade connector
  Instructions