• Since its inception, the Hypercharger has continued to evolve to meet the needs of the performance minded rider
• What you see here is without a doubt best flowing Hypercharger we have ever produced
• The interior shapes, especially the critical radius leading into the carb or throttle body, have been carefully designed
• The outer cover incorporates an additional scoop to direct air into a high-flow, washable foam filter element that seats snuggly in the end of the round K&N filter element
• This filter assembly is one of the best flowing on the market and is capable of supplying enough air to even the highest output street motors
• The frontal opening is huge and as with all Hyperchargers, the vacuum operated butterflies allow almost unrestricted airflow to the filter under high-load riding situations

(1) Chrome aluminum air cleaner assembly W/air filter

(1) Air cleaner manifold

(1) V2K Manifold insert

(1) V2K Support bracket

(1) Rubber base mini filter

(1) Oxygen sensor mounting bracket

(1) 20mm O-Ring

(1) 1/8" Chrome nipple

(1) 90 Degree, 1/4" chrome elbow

(1) V2K Chrome O2 sensor retainer

(2) 6mm Aluminum tapered bolt cap

(2) Spacers

(1) 1/2" Wire clamp

(1) 3/4" Wire clamp

(1) Gasket and O-ring set

(1) Fastener kit

(4) 6mm-1.00 x 20mm Socket cap head bolts

(2) 6mm-1.00 x 35mm Socket cap head bolts

(1) 6mm-1.00 x 50mm Socket cap head bolt

(1) 10-24 x 5/8" Button head bolt

(1) 5/32" x 16" Black rubber hose

(1) Black nylon fitting

(2) Gaskets

(1) Gasket W/adhesive backing

(3) 1/4"-20 x 5/8" Socket cap head bolts

Instructions

The Air Resources Board (ARB) does not permit the use of aftermarket emission-related parts that alter the air/fuel ratio of an emission-controlled vehicle. Due to these legal restrictions this part cannot be shipped to California.