The Hypercharger set the standard over 20 years ago as the benchmark in V-twin performance! Normally, replacing a stock air cleaner with a Hypercharger will net you a 7-9 horsepower increase at the rear wheel, with no other modifications! Add a carb recalibration kit, a good performance exhaust system (not drag pipes) and a 12-14 horsepower increase is normal. Twist the throttle and watch the hotrod-styled vacuum-operated butterflies mesmerize onlookers. Includes lifetime washable K&N filter element.

• Air cleaner/intake that works as good as it looks
• Butterflies are automatically opened by the vacuum pod as your motor demands more air
• Use a replaceable, serviceable K&N filter to ensure top performance
• All necessary installation hardware included
• Made in the U.S.A.

NOTE: Not legal for street use on pollution-controlled vehicles.

(1) Chrome hypercharger assembly with filter

(1) 15-1/2" Vacuum hose

(1) Plastic straight hose fitting

(2) Gaskets

(1) Gasket with adhesive back

(3) 1/4"-20 x 5/8" Socket cap head bolts

(1) 1/2" Barbed elbow hose fitting

(1) Black aluminium air cleaner adapter

(1) Rubber inlet flow plate

(1) Black steel support bracket

(1) 6mm-1.00 x 50mm Socket cap head bolt

(2) 5mm-.80 x 14mm Socket cap head bolts

(2) 5mm Split lock washers

(1) 5mm-.80 Nylock nut

Instructions

The Air Resources Board (ARB) does not permit the use of aftermarket emission-related parts that alter the air/fuel ratio of an emission-controlled vehicle. Due to these legal restrictions this part cannot be shipped to California.