The Hypercharger set the standard over 20 years ago as the benchmark in V-twin performance! Normally, replacing a stock air cleaner with a Hypercharger will net you a 7-9 horsepower increase at the rear wheel, with no other modifications! Add a carb recalibration kit, a good performance exhaust system (not drag pipes) and a 12-14 horsepower increase is normal. Twist the throttle and watch the hotrod-styled vacuum-operated butterflies mesmerize onlookers. Includes lifetime washable K&N filter element.
NOTE: Not legal for street use on pollution-controlled vehicles.
Included Items: (1) Hypercharger assembly (1) Vacuum hose (1) Straight hose fitting (2) Gaskets (1) Adhesive gasket (3) 1/4"-2 x 5/8" Socket cap head bolts (1) Air clean adapter (1) Rubber inlet flow plate (1) Support bracket (1) 6mm-1.0 x 50mm Socket cap head bolt (1) Nylock nut (2) 5mm-.08 x 14mm Socket cap head bolt (2) 5mm Split lock washers 1/2" Barbed elbow hose fitting (1) 7/8" Spacer (3) 1/4"-20 x 1-1/2" Socket cap head bolts Installation and air filter cleaning instructions
The Air Resources Board (ARB) does not permit the use of aftermarket emission-related parts that alter the air/fuel ratio of an emission-controlled vehicle. Due to these legal restrictions this part cannot be shipped to California. |
Color | Chrome |
---|---|
Finish | Chrome |
Mfg #: | 9435 |
Part #: | 4901627 |
Type | Air Cleaner |
Units | Each |
Weight | 5.30 lbs |
Part 4901627 fits the following machines