Khrome Werks 3 1/2 in. HP-Plus Tapered Touring Mufflers - 202285

    Khrome Werks 3 1/2 in. HP-Plus Tapered Touring Mufflers - 202285

    Make sure this fits your ride
    Item is no longer available
    (0) Options available
    Returns not accepted on open box items
    Khrome Werks 3 1/2 in. HP-Plus Tapered Touring Mufflers
    • Increase your horsepower and torque with a deep, distinctive, but quieter sound
    • Fit models with OEM crossover or aftermarket "True Duals" systems
    • All new HP-Plus patented dual-chamber absorptive baffle large, short front absorptive chamber mutes deceleration popping
    • Long, rear absorptive chamber features HP-Plus resonator both chambers are wrapped with a laminated muffler packing consisting of a thin layer of stainless steel under an ultra-high-temperature basalt wool
    • Dual-layer packing covers the complete length of the baffle to minimize discoloration and absorbs the higher frequencies
    • Low-speed torque is improved over our 3.00 in. mufflers; overall decibel level is reduced while still retaining high-quality, deep, Khrome Werks signature sound
    • Utilize factory mounting hardware and clamps; sold in pairs
    • Made in the U.S.A.

    U.S. patent 5,173,576

    NOTES:
    ECM unit may need to be recalibrated if used with free-flowing air cleaners and/or modified engines. Muffler shells may discolor if ECM units are not calibrated correctly.

    These mufflers are designed for use on closed-course competition motorcycles only and do not conform to U.S. EPA noise emission standards.

    NOTE: Not all products are legal for sale or use on pollution controlled vehicles. Check your local laws and the manufacturers information

    NOTE: There is no warranty on exhaust pipes and mufflers with regard to any discoloration. Discoloration (blueing) is the result of tuning characteristics, cam timing, carburetor jetting, overheating, etc., and is not caused by defective manufacturing. See the CHEMS/LUBES section for products that will help prevent or remove blueing.

    NOTE: Installation of a new exhaust system may change your motorcycles fuel-air mixture requirements. Please consult the exhaust manufacturer directly with questions regarding any modifications that may need to be made during or after installing their product. If a jet kit or fuel processor is recommended, see the FUEL/INTAKE section

    The Air Resources Board (ARB) does not permit the use of aftermarket emission-related parts that alter the air/fuel ratio of an emission-controlled vehicle. Due to these legal restrictions this part cannot be shipped to California.

    Specifications
    Color Chrome
    Finish Chrome
    Mfg #: 202285
    Part #: 4405181
    Style Tapered Tip
    Type Slip-On/Muffler
    Units Pair
    Weight 17.85 lbs
    Vendor Part Number(s):
    18010416
    Alternate/OEM Part Number(s):
    18010416
    WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov
    Resources & Manuals
    Fitment for Khrome Werks 3 1/2 in. HP-Plus Tapered Touring Mufflers

    Part 4405181 fits the following machines

    Harley-Davidson
    Reviews & Questions