Feuling Parts HP+ Complete 525 Grind Chain Drive Cam Kit - 7220

    Feuling Parts HP+ Complete 525 Grind Chain Drive Cam Kit - 7220

    Make sure this fits your ride
    Item is no longer available
    (0) Options available
    Returns not accepted on open box items
    Feuling Parts HP+ Complete 525 Grind Chain Drive Cam Kit
    • Kit includes all necessary components from the top to the bottom of the camchest
    • Provides maximum reliability, peak performance and the coolest engine and oil temperatures obtainable
    • Each kit comes with HP+ oil pump, high flow camplate, Reaper® camshafts, HP+ lifters, Fast Instal™ pushrods, Timken® bearings, gaskets, O-rings, copper exhaust gaskets, ARP® fasteners, washers, moly paste, Loctite® and hardware
    • Each part works and functions together in total harmony


    • 525 GRIND
    • Increases torque band width and fuel economy and are a great bolt-in camshaft upgrade for stock engines
    • Produces strong low- and mid-range power with linear horsepower and torque curve
    • Can be used with factory valve springs, pushrods and lifters
    • Increases throttle response and eases starting
    • Responds well to cylinder head work
    • Power range from 1750-5800 rpm


    Intake
    Duration @ .053 in.: 226 degree
    Valve Lift: .525 in.
    Open: 4 degree
    Close: 42 degree
    Lift @ TDC: .099 in.
    Lobe Centerline: 109 degree

    Exhaust
    Duration @ .053 in.: 236 degree
    Valve lift: .535 in.
    Open: 51 degree
    Close: 5 degree
    Lift @ TDC: .112 in.
    Lobe Centerline: 113 degree

    NOTE: Conversion cams use early 99-06 style inner cam journals with late style 07-13 outer journals requiring late style hydraulic chain tensioners, sprockets and chains.

    Included Items:
    (1) Aluminum cam plate
    (1) 5/16 in.-24 set screw
    (2) Caged needle bearings
    (4) Hydraulic roller lifters
    (1) Oil pump
    (3) O-rings
    (2) Cam shafts
    (4) 1/4 in.-20 x 1 1/4 in. black flange had bolts
    (6) 1/4 in.-20 x 1 in. black flange head bolts
    (2) Intake pushrods with bases
    (2) Exhaust pushrods with bases
    (1) Adjustment fixture
    (1) .017 fluid oz. 271 loctite high strenght threadlocker
    (1) .02 fluid oz. 262 loctite permanent strength threadlocker
    (1) .5 oz/ tube assembly lubricant
    (1) 3/8 in.-24 x 1 3/4 in. black flange head bolt
    (1) 3/8 in. black spacer washer
    (1) 5/16 in.-18 x 3/4 in. black flange head bolts
    (1) 5/16 in. black spacer washer
    (1) Black snap ring
    (1) Cam change gasket includes (4) Pushrod tube center O-rintgs, (4) Tappet black o-rings, (2) Oil pump O-rings, (2) Twin-cam tappet cover gaskets, (1) Cam gear cover beaded gasket, (2) Copper wire exhaust gaskets

    The Air Resources Board (ARB) does not permit the use of aftermarket emission-related parts that alter the air/fuel ratio of an emission-controlled vehicle. Due to these legal restrictions this part cannot be shipped to California.

    Specifications
    Mfg #: 7220
    Part #: 146104
    Type Cam
    Type Camshaft
    Units Kit
    Weight 11.10 lbs
    Vendor Part Number(s):
    09250678
    Alternate/OEM Part Number(s):
    09250678
    Resources & Manuals
    Fitment for Feuling Parts HP+ Complete 525 Grind Chain Drive Cam Kit

    Part 146104 fits the following machines

    Harley-Davidson
    Reviews & Questions