Dynojet Stage 1 Jet Kit
- Part #: 171783
- Manufacturer Part #: 2159
Overview of Dynojet Stage 1 Jet Kit
- Specifically for motorcycles with stock engines using stock airboxes, air filters and stock or aftermarket exhaust systems
- Adjust to allow for the use of well-designed aftermarket exhaust systems and stock replacement air filters
- Get better throttle response and driveability
- Expect power increases of approximately 5 percent throughout the power range
(8) Main jets(4 ea. -144,150)
(4) Fuel needles
(8) Adjusting washers
(4) Slide springs
(1) Slide drill
(1) Plug drill
Specs for Dynojet Stage 1 Jet Kit
Fitment for Dynojet Stage 1 Jet Kit
Part 171783 fits the following machines
|1997 Kawasaki ZX600F Ninja ZX-6R|
|1996 Kawasaki ZX600F Ninja ZX-6R|
|1995 Kawasaki ZX600F Ninja ZX-6R|
Reviews for Dynojet Stage 1 Jet Kit
I guess this is a good kit.The reason i said that is because i didn't use all of it.The air/fuel tool would slip on the air/fuel screw, i had to bend the flat edge to make it work.I did what is called the scar mod,you can look it up on the vtx forums. I used the spring out of this kit and put one shim under the stock needle and turned the air fuel screw in and back out 2 1/2 turns and my bike is running good.I also cut part of the tit under the needle holder cap the way the scar mod said to. Hope this helps someone.I would recommend this item to a friend.
VT750C2 Jet Kit
This kit was just what the doctor ordered for my bike after I installed my Vance & Hines pipes. It was fairly easy to install if you are mechanically inclined, otherwise let your shop do it for you. The power increase is noticable.I would recommend this item to a friend.
I'm happy with these jets as they were in stock and great delivery. Came with complete instructions, no missing parts.I would recommend this item to a friend.
Major Difference Immediately
This Stage 1 jet kit is awesome. I installed it on my '02 Shadow Spirit VT1100C and instantly felt a difference. The bike starts up immediately, the acceleration is very fluid and this has cured any decel popping I once had. I highly recommend this kit for anyone looking to smooth out their power band and let the full potential of their engine come to life!I would recommend this item to a friend.
I put these on my 93 virago 1100 with jardine rumblers. Installation was fairly straight forward. I found it odd that the hole in the new jets (mine came with 2x110 and 2x114) was smaller than the stock jets, but the needle shape and position must make up for that.I would recommend this item to a friend.
Not too bad
I thought it would be tough to install, not bad at all. Nice and smooth after install. Great choice for those who still run carbs.I would recommend this item to a friend.
I would recommend this item to a friend.
Great Product - Poor Instructions
Product is very good, however the directions need a lot to be desired. If you have never done a re-jet before find a good website online that walks you through it. It is very easy, but the directions included with this product is pretty weak. The product itself is very good.I would recommend this item to a friend.
Instructions and Media for Dynojet Stage 1 Jet Kit
|Instructions - PDF||Instructional PDF|