• The same craftsmanship and high quality fit, finish and materials as the complete systems
• Designed, tested and re-checked for fit to assure you they fit like a glove, retaining the use of all center and sidestands; and that they won't interfere with footpegs, floorboards or any other part of the motorcycle
• Better sound and style, with larger, longer muffler bodies than the competition
• 3 in. Muffler bodies are used on the OEM headpipes
• Baffles are non-removable
• No re-jetting necessary although it is recommended for best performance
• 4-into-4 includes two mufflers for each side

Note: Not all products are legal for sale or use on pollution controlled vehicles. Check your local laws and the manufacturers information

Note: Installation of a new exhaust system may change your motorcycles fuel-air mixture requirements. Please consult the manufacturer directly with questions regarding any modifications that may need to be made during, or after installing their product. If a jet kit or EFI controller is recommended please see the Intake/Fuel section for products available

Note: Exhaust discoloration (bluing) is caused by engine conditions such as cam timing, fuel-air mixture, operating temperature, etc. It is not the result of defective manufacturing; therefore it is not covered by any warranty. See the Chems/Lubes section for products to help remove or prevent exhaust discoloration

(1) Front/Top muffler

(1) Rear/Bottom muffler

(1) Left/Top

(1) Left/Bottom muffler

(2) Clamps

(2) 5/16-18 x 3/4" Hex bolts

(2) 5/16"  Washers

(2) 5/16" Lock washers

Instructions

The Air Resources Board (ARB) does not permit the use of aftermarket emission-related parts that alter the air/fuel ratio of an emission-controlled vehicle. Due to these legal restrictions this part cannot be shipped to California.