Need Assistance?
Legendary Service... Ask Your Friends - Since 1969
800.969.7501
Over 160K Powersport Items - In-Stock and ready to ship today! View tires, apparel, helmets, exhaust and more!

Cobra FI2000R Tripot Plug-In Fuel Processor for Fuel Injected Models - 692-1605

  • Part #:
    172523
  • Manufacturer Part #:
    692-1605

MSRP Price: $249.95

Our Price: $219.88

You Save:
$30.07 (12%)
1 on Hand

Overview of Cobra FI2000R Tripot Plug-In Fuel Processor for Fuel Injected Models - 692-1605

  • Proven Fi2000 now comes with more advanced tuning options for modified bikes
  • Step-by-step instructions
  • Clip into fuel-injection and go with leads that snap directly into the bikes injector bodies
  • Third tuning pot can be thought of as an electronic main jet
  • Air/fuel mixture problems are eliminated along with backfiring when decelerating
  • Ten settings of fuel adjustments (0-10 settings)
  • Gives a better ride by smoothing out the powerband and throttle response
  • Easy to use with no downloads or map adjustments required


  • NOTE: Standard models not legal for operation on public highways in the state of California

    NOTE: For California Softail models 2001-2005 and California Dyna models 2004-2005 use Part No. 202478

The Air Resources Board (ARB) does not permit the use of aftermarket emission-related parts that alter the air/fuel ratio of an emission-controlled vehicle. Due to these legal restrictions this part cannot be shipped to California.

Specs for Cobra FI2000R Tripot Plug-In Fuel Processor for Fuel Injected Models - 692-1605

Type Fuel Injection Module
Units Each
Weight 0.50 lbs

Cross reference number(s):

10200095

Specs for Cobra FI2000R Tripot Plug-In Fuel Processor for Fuel Injected Models - 692-1605

Type Fuel Injection Module
Units Each
Weight 0.50 lbs

Fitment for Cobra FI2000R Tripot Plug-In Fuel Processor for Fuel Injected Models - 692-1605

See if this part fits your ride

Part 172523 fits the following machines

Harley-Davidson
  • 2005 Harley-Davidson Dyna Low Rider Injected - FXDL I
  • 2004 Harley-Davidson Dyna Low Rider Injected - FXDL I
  • 2005 Harley-Davidson Dyna Super Glide Custom Injected - FXDC I
  • 2005 Harley-Davidson Dyna Super Glide Injected - FXD I
  • 2004 Harley-Davidson Dyna Super Glide Injected - FXD I
  • 2005 Harley-Davidson Dyna Super Glide Sport Injected - FXDX I
  • 2004 Harley-Davidson Dyna Super Glide Sport Injected - FXDX I
  • 2005 Harley-Davidson Dyna Wide Glide Injected - FXDWG I
  • 2004 Harley-Davidson Dyna Wide Glide Injected - FXDWG I
  • 2005 Harley-Davidson Heritage Softail Classic Injected - FLSTC I
  • 2004 Harley-Davidson Heritage Softail Classic Injected - FLSTC I
  • 2003 Harley-Davidson Heritage Softail Classic Injected - FLSTC I
  • 2002 Harley-Davidson Heritage Softail Classic Injected - FLSTC I
  • 2001 Harley-Davidson Heritage Softail Classic Injected - FLSTC I
  • 2003 Harley-Davidson Heritage Softail Springer Injected - FLSTS I
  • 2002 Harley-Davidson Heritage Softail Springer Injected - FLSTS I
  • 2001 Harley-Davidson Heritage Softail Springer Injected - FLSTS I
  • 2005 Harley-Davidson Softail Deluxe Injected - FLSTN I
  • 2005 Harley-Davidson Softail Deuce Injected - FXSTD I
  • 2004 Harley-Davidson Softail Deuce Injected - FXSTD I
  • 2003 Harley-Davidson Softail Deuce Injected - FXSTD I
  • 2002 Harley-Davidson Softail Deuce Injected - FXSTD I
  • 2001 Harley-Davidson Softail Deuce Injected - FXSTD I
  • 2005 Harley-Davidson Softail Fat Boy Injected - FLSTF I
  • 2004 Harley-Davidson Softail Fat Boy Injected - FLSTF I
  • 2003 Harley-Davidson Softail Fat Boy Injected - FLSTF I
  • 2002 Harley-Davidson Softail Fat Boy Injected - FLSTF I
  • 2001 Harley-Davidson Softail Fat Boy Injected - FLSTF I
  • 2005 Harley-Davidson Softail Night Train Injected - FXSTB I
  • 2004 Harley-Davidson Softail Night Train Injected - FXSTB I
  • 2003 Harley-Davidson Softail Night Train Injected - FXSTB I
  • 2002 Harley-Davidson Softail Night Train Injected - FXSTB I
  • 2001 Harley-Davidson Softail Night Train Injected - FXSTB I
  • 2005 Harley-Davidson Softail Springer Classic Injected - FLSTSC I
  • 2005 Harley-Davidson Softail Springer Injected - FXSTS I
  • 2004 Harley-Davidson Softail Springer Injected - FXSTS I
  • 2003 Harley-Davidson Softail Springer Injected - FXSTS I
  • 2002 Harley-Davidson Softail Springer Injected - FXSTS I
  • 2001 Harley-Davidson Softail Springer Injected - FXSTS I
  • 2005 Harley-Davidson Softail Standard Injected - FXST I
  • 2004 Harley-Davidson Softail Standard Injected - FXST I
  • 2003 Harley-Davidson Softail Standard Injected - FXST I
  • 2002 Harley-Davidson Softail Standard Injected - FXST I
  • 2001 Harley-Davidson Softail Standard Injected - FXST I
4.6 / 5.0
8 Reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Stars
6
1
1
0
0
Finish
4.0 / 5
Fit
4.2 / 5
Quality
4.4 / 5
Style
4.6 / 5
Value
4.9 / 5
Would you recommend this product?
Yes (1)
Fit
5 / 5
Quality
5 / 5
Style
5 / 5
Value
5 / 5
Cobra FI2000R- GOOD VALUE
This product is a must when you put a 2 into 1 exhaust on your bike. If you follow the instructions, the installation is easy. If you don't remove the tank, it takes a little longer to remove the injection clips if you have large hands. The tuning instructions are simple to follow.
August 9, 2010
Fit
5 / 5
Quality
5 / 5
Style
5 / 5
Value
5 / 5
FI200R Tripot Plug In Fuel Processor
Took approximately 2 hours to install.
I recently installed a set of cobra pipes on my bike, replacing drag pipes. I was experiencing a lot of backfire when down shifting or decelerating.
I was not sure what to expect from this unit. I had already made up my mind if I did not see noticeable improvement, I was going to return the unit immediately.
After installation, I fired my Road King up and headed for the interstate. As the add states, it virtually eliminated backfiring. I even notice an improvement in top in cruising. I'm glad I made the decision to try it out!
June 16, 2011
Fit
5 / 5
Quality
5 / 5
Style
5 / 5
Value
5 / 5
definitely worth the money!
It was very easy to install,however getting the settings for my bikes mods took a little while of trial an error.The only thing I would change is in the installation instructions. When you first test the unit all the LEDS only come on for the amount of time the fuel pump pressurize then they go off, and you can start your bike.The way the instructions are written they make it seem the should stay on longer until you start your engine . Other than that I am very happy with the unit and the way my bike runs now.
March 1, 2012
Fit
3 / 5
Quality
4 / 5
Style
4 / 5
Value
5 / 5
easy setup
took about 1.5 hours to install. on quick test drive has smoother pickup. I rode 300 mile today.no pinging and smooth exceleration. did not see fuel millage drop.
December 13, 2015
Fit
5 / 5
Quality
5 / 5
Style
5 / 5
Value
5 / 5
great item
Give your self time to install(1 to 2 hrs) and your good.This is realy cool because if you change something on the bike you can adjust for it. Ihave done afew roadside adjustments and its great!!
September 6, 2010
Fit
4 / 5
Quality
5 / 5
Style
5 / 5
Value
5 / 5
Cost Effective Option
I needed to get a fuel processor since I changed both my carburetor cover and my exhaust system, but I didn't want to spend an arm and leg to do it. The Comet 2000 is a good fit for me. for my 2001 Road King w Delphi Fi. Installation wasn't too difficult, it took me about three hours and I'm only a shade-tree mechanic at best.

The key to installing this device is to have the necessary tools. I used two long handled slotted screwdrivers and a long needle nose pliers to remove and then reset the fuel injector electrodes. Loosening the fuel tank's three screws and removing them will help facilitate lifting the tank up two inches so that you can get at the injector electrodes it also helps if most of the gas is out of the tank making it lighter to lift up. You need to approach the injector connectors from the right side of the bike. It will be easier if you remove your breather cover and filter first. Removing the OEM connectors requires that you push in the wire bales at the top of the connector while pushing up on the connector to slide it off. The rear connector is not a problem, the front is more difficult since the bale is pointed at an angle away from you. I found that using a long blade screwdriver to push in on the bale helps out a lot. Using the other long blade screwdriver to push up on the connector at the same time helps great too.

Two things you need to keep in mind when assembling the wires and the device. Keep all the wires away from hot spots by using the supplied bands, especially at the cylinder heads and the rear exhaust manifold where the wires head under the seat for placement, and second, when you life up your tank you might pull your starter switch connector out of its place causing loss of electrical power. This will require you to remove your dashboard and check the connector to your start/off/light switch.

Once the Comet is connected and and you have set the three pots to the correct settings, you'll find your bike will run a lot smoother and you won't have any backfires when you power-down in gear. I haven't had it long enough to see any differences in fuel milage.

With the three pot setting screws instead of the automatic setting of the more expensive units, you are saving significant money. I personally think that using this Comet model is worth the savings.

The control unit is not water proof or even water resistant. I would be very careful using high pressure hoses to wash your chariot. Placing the device in a plastic bag may not be a bad idea. That is one reason why I gave it only 4 stars on fit and finish.
April 3, 2012
Finish
4 / 5
Fit
4 / 5
Quality
3 / 5
Value
5 / 5
Would you recommend this product?
Yes
Easy instal clean finish
All done in the weekend warrior garage!
All done in the weekend warrior garage!
July 5, 2017
Purchased
6 months ago
Fit
3 / 5
Quality
3 / 5
Style
3 / 5
Value
4 / 5
No Review Title Entered By User
No Review Text Entered By User
November 7, 2011
Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!

Instructions and Manuals for Cobra FI2000R Tripot Plug-In Fuel Processor for Fuel Injected Models - 692-1605

You May Also Be Interested In