Design:

• Compared to our original Solo seat, the new Solo II has a shorter overall length and two more inches of kick in the tail to deepen the seating area and improve its visual flow on bikes with steep backbones.
• Every other technical spec and silhouette of the Solo II is identical to our tried and true Solo Seat.

Fitment:

• This is a custom motorcycle component that requires basic fab skills and shop savvy to install properly.
• If your motorcycle has a seat hinge and/or spring bungs on the frame, youÃ' re halfway there, though some additional modifications may be required.

Construction:

• 1/8-inch thick (3mm) stamped steel pan with welded carriage bolts on nose and tail for spring and hinge mounting.
• One inch thick molded polyurethane foam padding.
• Four carriage bolts are welded onto the bottom of the pan to facilitate spring and seat hinge mounting.
• Your frame may require modifications to nose hinge and spring bungs for proper fitment.
  
  Included Items:
  (1) Black steel seat pan with foam pad
  (4) 5/16 in.-18 nyloc nuts
  (4) 5/16 in. flat washers
  
  Overall Length: 14-1/4 in.
  Drivers Seat:
  Length: 13in.
  Width: 11-5/8 in.
  Drivers Lumbar Height: 3 1/2 in.
• Spring mounting C to C: 7-1/8 in. 
• Front mount C to C: 3-1/4 in.