• Like every other taillight in the Biltwell line, our Bee Hive assembly is a custom accessory, and does not retrofit to any stock H-D wiring harness or taillight bracket. If you have basic tools and customizing skills, installing this light assembly on your Model-A style aftermarket taillight bracket is easy. For advanced chopper builders and home fabricators, we also offer two weld-on brackets and one bolt-on bracket to solve a variety of custom applications. See photos attached for finished assembly on a variety of Biltwell and aftermarket brackets.
• CNC lathe-turned 6061 T-6 aluminum light housing; extra thick injection-molded polycarbonate plastic lens with 5-40 Phillips head mounting screws; die-cut rubber internal LED spacer gasket; custom 15-element LED board with two phases (brake light and running light) and three wires (ground, brake and running lights); two 1/4-20 button head Allen bolts for mounting on Biltwell custom fender bracket (sold separately) or existing Model-A style taillight/license plate brackets.
• The outside diameter of the Model Bs alloy housing is just over 2-5/8 inches (67mm), and the red lens is an inch (35mm) smaller: just 1-5/8 inches.
• When illuminated the LED is easily visible at 100 meters, but due to its small size it may not pass safety inspection in your state or country of registration.
• This is a custom component for handcrafted motorcycles, so the DOT-worthiness of such vehicles is always dubious.
• If you are looking for laser brightness from outer space, please consider another taillight.
• Our Model B is for guys who want to build the cleanest, leanest custom motorcycle possible.

(1) Taillight assembly W/wiring harness

(2) 1/4"-20 X 3/8" button head bolts

No instructions