• Excellent grip at all lean angles from large contact patch
• Interrupted center groove to resist tracking
• Special rubber compound formulated for excellent grip
• Bias-ply construction
• Wide range of sizes and matching tread design front and rear

NOTE:
Dennis Kirk recommends a new tube and rim strip when replacing a tube-type tire


Safety Warning:
Please consult tire manufacturers publication(s) and/or website(s) for information on tire care, safety, installation, maintenance, manufacturer’s warranty and other information. The tires used for your application must have a load index and speed rating equal to or greater than the tires fitted as original equipment.

Sidewall ID Information: Avon 110/ 80-17 M/C 57V Roadrider

Dimensions:
Inflated Width/Measuring Rim Width: 4.3 in./2.50 in.
Inflated Diameter: 23.9 in.
Acceptable Rim Width: 2.15-3.00 in.
Deepest Tread Depth: 5/32 in.
Balance DOT: None
Directional Arrow: Yes
Speed Rating: W-Rated up to 168 MPH

Capacities and Construction:
Load Capacity/Inflation Pressure 507 lbs/42 psi
Bias or Radial Ply: Bias
Load Range: B
Tread Plies/Material: 2 Polyester/1 Nylon
Sidewall Plies/Material: 2 Polyester
DOT Approved for Road Use: Yes
Tube or Tubeless: Tubeless-Use tube with tube-type rims