Legendary Service... Ask Your Friends - Since 1969
Need Assistance?
Over 150K Powersport Items - In-Stock and ready to ship today! View tires, apparel, helmets, exhaust and more!

Dynatek Dyna Tune Auto Tune Kit - DT-4

  • Part #: 2001163
  • Manufacturer Part #: DT-4

Original Price: $359.96


Closeout Price: $80.99

You Save:
$278.97 (78%)
1 on Hand

Overview of Dynatek Dyna Tune Auto Tune Kit - DT-4

  • This is an add-on device that allows the tuning of an existing FI controller, such as the Dyna-Tek Fusion (not available from Dennis Kirk) or the Power Commander V. 
  • Monitor the fuel mixture by installing this 18mm Wide Band O2 sensor in the exhaust
  • Automatically corrects as you ride by sending information to the Dynatek control module (sold separately); you can feel the changes as they occur
  • Each map includes a preset air/fuel ratio target values to allow the DynaTune to find the best overall settings
  • Air/fuel ratios are fully adjustable from the baseline for more advanced users
  • Fully adjustable throttle opening/rpm combination
  • Provides peak output at larger throttle openings
  • Make adjustments at all times or by using the "map switch port" on the Dynatek control module (sold separately)
  • Toggle back and forth between the tuning mode and the base map settings
  • Configure the kit to wait until the bike is at a certain operating temperature before beginning to make adjustments



NOTE: For use with Dyna FS, Dynatek 3000 or Dyna 2000 HD EFI fuel and ignition controllers; sold separately.

Included Items:
(1) Dynatune module with wire harness
(2) Oxygen sensors with M18x1.5mm thread, 10 1/4" long wire and black plastic plugs with six male blade connectors
(1) 24" long wire harness with six female blade gray/black plug on one end and white, yellow, blue, red gray and black wires without connectors on teh opposite end
(1) 51 1/2" long wire harness with six female blad gray/black plug on one end and white, yellow, blue, red, gray and black wires without connectorson teh opposite end
(3) 7 3/4" long zip ties
(2) M18-1.5mm threaded bung adapters
(2) Port plugs
(2) Velcro strips
(1) Alcohol swab
(1) Small black connector
(1) 18" Overall length - green and white wires wtih black female connectors on each end

The Air Resources Board (ARB) does not permit the use of aftermarket emission-related parts that alter the air/fuel ratio of an emission-controlled vehicle. Due to these legal restrictions this part cannot be shipped to California.

Specs for Dynatek Dyna Tune Auto Tune Kit - DT-4

Type Tuning Kit
Type Auto Tune Kit
Units Each
Weight 1.35 lbs

Specs for Dynatek Dyna Tune Auto Tune Kit - DT-4

Type Tuning Kit
Type Auto Tune Kit
Units Each
Weight 1.35 lbs

Fitment for Dynatek Dyna Tune Auto Tune Kit - DT-4

See if this part fits your ride

Part 2001163 fits the following machines

Harley-Davidson
  • 2012 Harley-Davidson Dyna Fat Bob - FXDF
  • 2012 Harley-Davidson Dyna Street Bob - FXDB
  • 2012 Harley-Davidson Dyna Super Glide Custom - FXDC
  • 2005 Harley-Davidson Dyna Super Glide Custom - FXDC
  • 2012 Harley-Davidson Dyna Switchback - FLD
  • 2012 Harley-Davidson Dyna Wide Glide - FXDWG
  • 2011 Harley-Davidson Heritage Softail Classic - FLSTC
  • 2011 Harley-Davidson Softail Blackline - FXS
  • 2011 Harley-Davidson Softail Cross Bones - FLSTSB
  • 2011 Harley-Davidson Softail Deluxe - FLSTN
  • 2011 Harley-Davidson Softail Fat Boy - FLSTF
  • 2011 Harley-Davidson Softail Fat Boy Lo - FLSTFB
  • 2011 Harley-Davidson Softail Rocker C - FXCWC
There are no reviews for this item. Write Review
Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!

Instructions and Manuals for Dynatek Dyna Tune Auto Tune Kit - DT-4