Khrome Werks 1 3/4 in. HP-Plus Drag Pipe Baffles - 202012
- Part #: H44562
- Manufacturer Part #: 202012
- Our Price: $43.99
Overview of Khrome Werks 1 3/4 in. HP-Plus Drag Pipe Baffles - 202012
- Reduce sound level without reducing flow-through performance
- Baffles feature patented HP-PLUS" design with all steel construction
- Easy to install in 1 3/4 in. 16- or 18-gauge drag pipes
- Baffles secured with 1/4 in.-20 screws and locking kep nuts
- Made in the U.S.A.
- Sold in pairs
O.D. on Front: 1 5/8 in. in.
O.D. on Back: 1 5/8 in. in.
I.D. of Center Baffle: 9/16 in.
Length: 9 9/16 in.
Can Baffle Be Used with Wrap: No
Wrap Included: No
Mounting Bolts Included: Yes (bolt and nut 1/4 in.)
Threaded Insert for Mounting: No
Mounting Bolt on End or Side: Side
Specs for Khrome Werks 1 3/4 in. HP-Plus Drag Pipe Baffles - 202012
Reviews for Khrome Werks 1 3/4 in. HP-Plus Drag Pipe Baffles - 202012
Quick and easy install. Gets rid of the harshness drag pipes can give off while still retaining volume. If you're looking for a baffle to quiet down drag pipes, these are not it.I would recommend this item to a friend.
I purchased these after installing aftermarket slip-ons' on my wife's v-star and even their optional "quiet" baffles were still a bit too loud. I figured that these would fit inside of those baffles and they did with a little adjustment per the instructions. They are well made & have a rather unique shape which I believe contributes to their effectiveness. While they were designed for drag pipes, they work well in our application too.I would recommend this item to a friend.
I would recommend this item to a friend.
I used these in the headpipes of a custom flatrack style exhaust on a Kawasaki W650 twin. Twins are inherantly loud especially with no cross-over pipe & big glass pack mufflers. Using these as "pre-mufflers" allowed me a noise reduction without any reduction in exhaust flow !I would recommend this item to a friend.
I ride an old Harley Davidson Shovelhead motorcycle. I put on 1 3/4" drag pipes to match the look of the bike. Well, the S&S Super E didn't seem to like that very much. There are various ways to fix the problem, but for me, Khrome Werks HP+ baffles were just the ticket. They eliminate a lot of the trouble the S&S had, provide a better power curve, and take just enough "edge" off the exhaust sound so that the neighbors don't call the cops as often while retaining that traditional Harley thump. They are easily installed. You can use a pair of pliers to bend the edges of the baffle to widen or narrow the overall width along the barrel, allowing a perfect fit even if your pipes are not quite exact. Drill a hole through the bottom of your pipes or through the inboard side to fasten the baffles securly with the supplied hardware. If you want a louder sound, you can cut off a couple or three inches from teh tail end of the baffles too. Highly recommended product!I would recommend this item to a friend.