If you ride ATVs or mountain bikes then you know what it is like to have a grip that slips. Despite all your best efforts to properly glue and safety wire the grip securely in place, it inevitably slips creating an annoyance and a safety hazard.

The act of gluing and wiring grips with specialty tools can be a hassle as well. The wire often breaks leaving a sharp point and wreaks havoc on both your hands and the grip. The gluing process is a mess and difficult to get consistent coverage between your grip and the bar due to the fact that the grip just pushes all the glue to one end or the other.

Risk Racing has a simple and effective solution. We are introducing the patent pending Fusion Grip Tech Bonding Strips and Fusion Spray Catalyst. Simply peel and stick the bonding strips to your bars. Then spray the bonding strips with the supplied Fusion Catalyst and easily slip your grip into place. At first the catalyst acts as a lubricant for easy grip installation, but after it dries it creates a lasting bond. The entire process is clean and simple.

Additionally, Fusion Grip Tech comes packaged with the new Risk Racing FUSION 2.0 Dual Compound Grips. The Grips are a high quality, dual compound soft grip with a reinforced grip end.

FEATURES
•The design of the grips greatly reduces heat and pressure, which reduces blistering and increases rider comfort
•Easy application: clean your handlebar, apply the bonding strips, shake and spray the catalyst to the exposed bonding strips, quickly apply grips, and you're done

INCLUDED
•1 x Pair of Fusion 2.0 Grips
•2 x Fusion bonding strips
•1 x Fusion spray catalyst

(2) Black/green rubber grips

(1) 2 Fl. oz. grip bonding activant

(2) 3-1/4" x 4-1/2" Bonding strips

Instructions

DIMENSIONS:

Length: 3-1/2"      

OD: 1-3/16"          

Handlebar: 7/8"          

Overall length: 4-3/4"