1.5" Signature Series Lift Kit Features:

- Zinc plating or powder coat finishes for long life in rugged conditions

- All installation hardware included

- Detailed step by step photo instructions

- Signature Series include High Lifter logo precision laser cut

- Backed by High Lifter Lifetime Warranty

NOTE: This kit does NOT fit any MAX OR XMR models.

NOTE: If running Outlaw DHT Axles and this lift kit, you need to remove the rear spacer as shown in the instructions. If running this lift kit with stock axles, the rear spacer is still needed. Please refer to the instruction manual for further information.

NOTE: The rear lift brackets will not work with with High Lifter Max Clearance Trailing Arms. We built lift into the trailing arm. If you use this lift plus our trailing arms it will cause axle problems.

Included Items:
(1) Front bracket large 18 1/4 in. long
(1) Front bracket small 3 1/2 in. long
(2) Tie rods 13 1/4 in. long
(1) Highlifter logo plate 8 in. long
(2) Rear brackets 3 3/4 in. long
(2) Rear brackets with ears 3 5/8 in. long
(2) Sway bar brackets 6 3/8 in. long
(2) Front spacers large 1 9/16 in. long
(2) Front medium spacers 1 1/8 in. long
(4) Front small spacers 1/4 in. long
(2) Rear spacers 1 in. long
(1) Axle spacer
(2) L-brackets
(1) Cotter pin
(4) 10mm-1.50 x 65mm hex head bolts
(4) 10mm-1.50 x 60mm hex head bolts
(4) 10mm-1.50 x 55mm hex head bolts
(14) 10mm-1.50 nyloc nuts
(4) Cable ties
(2) 1/4 in.-20 x 3/4 in. butt head bolts
(2) 1/4 in. washers
(2) 1/4 in. -20 nyloc nuts