NOTE: Some models require drilling extra hole(s) in skis to mount carbides NOTE: Wear rods replace the originals exactly on all models except those with E-Z Steer either as original equipment or installed later. For those models, the wear rods listed replace both the plate and the 2-stud, 14-3/4 in. wear rod with a 3-stud, 28 in. design. If you wish to retain the E-Z Steer plate, order part number 10533 for an X-Calibar I or part number 10610 for an X-Calibar III Plus design with 5 in. or 60º; carbide. Both are 14-3/4 in. long Dimensions: Length x Diameter: 20-3/8 in. x 7/16 in. Stud Diameter x Length: 5/16 in. x 1 in. Number of Studs: 3 Stud Center Mounting Distance From: Front to 1st: 3 in. 1st to 2nd: 7-1/8 in. 2nd to 3rd: 8-1/4 in. 3rd to End: 2 in. |
Degree of Carbide | 60 Degree |
---|---|
Diameter | 5/16 in. |
Diameter | 7/16 in. |
Length - Carbide | 4 in. |
Mfg #: | 505-625 |
Part #: | 031044 |
Stud Count | 3 |
Type | Carbide |
Units | Pair |
Weight | 2.31 lbs |
Part 031044 fits the following machines