• These kits include an oil pump with cover, mounting bolts, supply and return gears, drive shaft with keys and snap rings, check ball and spring, pressure relief valve and spring, check ball and release valve cover screws with O-rings, miscellaneous hose fittings, plugs, screws and gaskets
• Features include a smoother design and pressure relief towers that are .300 in. shorter than the OEM oil pump
• 36-91 pumps accept 3/8 in. rubber oil lines
• Replacement gaskets (H26-003) available separately
• Made in the U.S.A.

• NOTE: Engines from 70 through 80 will require a small drilling operation, and 70 through 72 engines will also need a plugging step. Both modifications can be accomplished easily while the engine is still in the frame by using the oil pump drill fixture, PART NO. H14-252

(1) Chrome oil pump assembly

(2) Oil pump gaskets

(1) Snap ring

(2) Half moon key

(2) Set screws

(3) Supply/Return hose fittings

(3) 1/8"-27 Plugs

(1) 1/16"-27 x 1/4" Pipe plug

(2) Supply/Return Elbow fittings

(1) Compression return fitting

(8) 1/4"-20 x 2-1/4" Socket cap bolts

(2) 1/4"-20 x 1-1/2" Hex head bolts

(6) 1/4" Flat washers 

Instructions