• Gives you a classic dual-exit look while increasing performance
• 1 3/4 in. exhaust tubing provides improved exhaust flow; rear head pipe is not flattened to clear the coil bracket
• Removable louvered baffles increase back pressure and torque
• New coil-mounting bracket increases clearance for the tightly curved rear headpipe on 07-newer models
• 2 1/2 in. heat shield gives the classic straight pipe look
• Available with 2 1/2 in. billet tips or a classic fishtail-style tip
• 24-inch muffler section lines up with the rear fender in the billet-tip version
• Fishtail-style tip sticks out six inches further than the standard billet tip for a more custom look
• O2 sensor bungs included
• Made in the U.S.A.

(1) Chrome right head pipe W/heat shield

(1) Chrome left front head pipe W/heat shield

(1) Chrome left rear exhaust pipe W/heat shield

(2) Chrome heat shields (1 left and 1 right)

(1) Black steel left exhaust bracket

(1) Black steel right exhaust bracket

(1) Black steel coil mounting bracket

(2) Chrome fishtail tips

(2) Chrome mufflers W/baffles

(3) Exhaust clamps

(4) 5/16"-18 X 5/8" Serrated flange hex head bolts

(4) 3/8"-16 X 3/4" Serrated flange hex head bolts

(4) 1/4"-20 X 3/8" Button head bolts

(1) 3/8"-16 X 2-1/2" Socket head bolt

(1) Black aluminum spacer

(7) #24 Hose clamps

(4) #28 Hose clamps

Instructions 

The Air Resources Board (ARB) does not permit the use of aftermarket emission-related parts that alter the air/fuel ratio of an emission-controlled vehicle. Due to these legal restrictions this part cannot be shipped to California.