• OEM No: 59604-39 
• Rigid rear fender with 5/8" wide braces includes tail section.
• The fender may require metal work for alignment and fit before primer and paint. 
• Fender is fully assembled and riveted together with hinge.
• Before finishing with primer or paint installer must prepare fender by checking alignment of fender tail and bracket.
• All hinge fenders must be hand fitted at hinge and pin area.
• Alignment will have to be adjusted and tweaked to fit your components.
• Before priming or painting, fit the fender body, braces and mounting points in place.
• Fender rivets, hinge and brackets will have to be tweaked for final fitment.
• Width: 8 in.

NOTE: 

• FOR TRIM SET, USE (VTWIN #50-0913) 

(1) Raw steel rear fender

(1) Steel fender flap

(3) #10-24 x 3/8" Pan head bolts

(3) #10/24 Flat washers

(3) #10-4 Split lock washers

No instructions

DIMENSIONS:

Inside width at mounting point: 7-1/8"                  

Outside width at mounting point: 7-7/16"                      

Straight length: 33-1/4"                                 

Contour length: 55"                                  

Height: 18-1/4"