Overview of Woodys Trail Blazer IV Carbide Wear Rods - TSD4-9500
- For more powerful cornering performance on the trails
- 6 in. of 60 degree center carbide with front and rear wear pads
- Full-length hardweld between carbide inserts
- 1/2 in. diameter host bar, 3/8 in. studs
NOTE: Some models require drilling extra holes in skis to mount carbides. Dennis Kirk recommends removing any paint from the studs before use by wire-brushing
Length x Diameter: 13 in. x 7/16 in.
Stud Length x Diameter: 1-1/2 in. x 5/16 in.
Number of Studs: 2
Stud Center Mounting Distance From:
Front to 1st: 3-1/2 in.
1st to 2nd: 6-1/4 in.
2nd to End: 3-1/4 in.
Specs for Woodys Trail Blazer IV Carbide Wear Rods - TSD4-9500
|Degree of Carbide
|Length - Carbide
Cross reference number(s):