MSRP Price: $91.95
Our Price: $82.76
NOTE: These requires two pairs (one pair for each ski)
NOTE: Some models require drilling extra holes in skis to mount carbides. Dennis Kirk recommends removing any paint from the studs before use by wire-brushing
NOTE: These wear rods replace the originals exactly on all models except those with EZ-Steer either as original equipment or installed later. For those models, the Top-Stock hard-surfaced, Trail series and Ultra carbides replace both the plate and the 2-stud, 14 3/4 in. wear rod with a 3-stud, 27 in. design. The Sno-Cross series wear rods replace both the plate and 2-stud, 14-3/4 in. wear rod with a 4-stud, 15-3/4 in. design
Polaris Touring 600 HO CFI IQ 08/Touring IQ FS/FST 08 only requires one rod per ski
Polaris Fusion 900 05, replaces OEM dual rods. For OEM single rod replace use 032053
Fits Polaris Rush and Switchback models listed with dual rods
Length/Diameter: 17-1/4 in./7/16 in.
Stud Diameter/Length: 5/16 in./NA in.
Number of Studs: 3
Stud Center Mounting Distance From:
Front to 1st: 3-7/8 in.
1st to 2nd: 7-1/8 in.
2nd to 3rd: 3-1/2 in.
3rd to End: 2-3/4 in.
|Degree of Carbide||60 Degree|
|Length - Carbide||8 in.|
Part 031898 fits the following machines