NOTE: 86-06 Softail models require O2 port plugs 44-03276
(1) Front Head Pipe
(1) Rear Head Pipe
(1) Front Heat Shield
(1) Rear Heat Shield
(2) Nut Plates
(2) 3/8" X 3/4" Flange Bolts
(4) 5/16" X 5/8" Flange Bolts
(1) Nylon Cable Tie
(1) 3/8" X 2-1/2" Allen Bolt
(5) #20 Hose Clamps
(2) #28 Hose Clamps
NOTE: Not all products are legal for sale or use on pollution controlled vehicles. Check your local laws and manufacturer's information.
For the best performance, A free-flowing air cleaner and adjustable fuel management system is recommended with this pipe.
Recommended Vance & Hines fuel management module: Fuel Pak FP3 (part number 2001886) For CAN Bus models only (Touring, Softail, Dyna and Sportster). Not compatible with V-Rod models
There is no warranty on exhaust pipes and mufflers with any regard to discoloration. Discoloration (bluing) is the result of tuning characteristics, cam timing, carburetor jetting, overheating, etc., and is not caused by defective manufacturing. See our Chems/Lubes section to help prevent or remove bluing.
The Air Resources Board (ARB) does not permit the use of aftermarket emission-related parts that alter the air/fuel ratio of an emission-controlled vehicle. Due to these legal restrictions this part cannot be shipped to California.
|Color - Primary||Chrome|
Part 4401511 fits the following machines