Vance & Hines Power Duals Head Pipes - 16759
- Part #: 4404140
- Manufacturer Part #: 16759
Overview of Vance & Hines Power Duals Head Pipes - 16759
- Power Duals is the ticket to style, quality and performance
- More than just individual head pipes, Power Duals integrates an exclusive Vance & Hines Power Chamber hidden behind a contoured heat shield that generates more horsepower and torque than stock
- This new right side design eliminates the heat issues on the left side for the passenger, routing hot exhaust gases below the footpeg and protecting vital engine components and side covers from heat damage
- Allows the use of any 09 OEM style mufflers
- Made in the U.S.A.
(2) Mounting brackets
(1) Header assembly
(1) Front heat shield
(1) Rear heat shield
(1) 90 Deg. heat shield
(1) Straight heat shield
(1) Collector heat shield
(1) Crosspipe header assembly
(1) Crosspipe heat shield
(2) #24 Hose clamps
(12) #20 Hose clamps
(1) Torca band clamp
(1) Nylon cable tie
(2) Exhaust gaskets
(1) 3/8-16 x 3 in. Socket head cap screw
(2) Dogbone nut plates
(2) 1 x 3/16 in. Washers
(1) 3/8 in. Lock washer
(4) 5/16 in. Flange head bolts
Note: Will also fit FLHTCUTG 09 (trike) if adapter kit 44-05604 is used
Note: Not all products are legal for sale or use on pollution controlled vehicles. Check your local laws and the manufacturers information
Note: Installation of a new exhaust system may change your motorcycles fuel-air mixture requirements. Please consult the manufacturer directly with questions regarding any modifications that may need to be made during, or after installing their product. If a jet kit or EFI controller is recommended please see the Intake/Fuel section for products available
Note: There is no warranty on exhaust pipes and mufflers with regard to any discoloration. Discoloration (blueing) is the result of tuning characteristics, cam timing, carburetor jetting, overheating, etc., and is not caused by defective manufacturing. See the CHEM/LUBES category for products that will help prevent or remove blueing.
|Type - Exhaust - Head Pipes & Mid Pipes||Head Pipe|
Specs for Vance & Hines Power Duals Head Pipes - 16759
|Type - Exhaust - Head Pipes & Mid Pipes||Head Pipe|
Fitment for Vance & Hines Power Duals Head Pipes - 16759
Part 4404140 fits the following machines
|2009 Harley-Davidson Electra Glide Classic - FLHTC|
|2009 Harley-Davidson Electra Glide Standard - FLHT|
|2009 Harley-Davidson Electra Glide Ultra Classic - FLHTCU|
|2009 Harley-Davidson Road Glide - FLTR|
|2009 Harley-Davidson Road King - FLHR|
|2009 Harley-Davidson Road King Classic - FLHRC|
|2009 Harley-Davidson Street Glide - FLHX|
|2009 Harley-Davidson Tri Glide Ultra Classic - FLHTCUTG|
Reviews for Vance & Hines Power Duals Head Pipes - 16759
Nice headers but toss the instructions
Got a good deal on these and installed myself this past weekend. First and foremost, my set came with the wrong directions so I printed the correct instructions from the V&H Website. I shouldn't have even wasted the paper. After following the directions initially, I got to the "install heat shields on a bench and try to wrestle all of that on your bike without scratching bike or chrome" and the instructions went in to the trash. If you've installed headers before, just do what you know how to do, work from back to front on the deinstall, front to back on the install and leave everything loose until you're ready to tighten everything up. Enough of my rant on the instructions. Fit was OK but took a little jockeying to get the exhaust flanges to drop in place. As everyone else stated, LOOSLEY fit everything and you'll be fine. No clue why V&H had to reinvent the wheel on the lower engine support bracket but it holds the unit solid. I like the full size cross over pipe but the heat shield on the left side of the bike is a PITA like others have said. Paired with a set of Supertrapp Elite silencers and the sound is great. No huge change in performance with just the exhaust as I expected but I was looking more to eliminate the cat and get my HD sound back. Overall, I am happy with the purchase, the pipes look great on the bike and the sound is great. No reason to suspect longevity based on other V&H products I've used and friends have used. I'd recommend them but don't rely heavily on the instructions or pictures so I can only go 4 stars due to this.I would recommend this item to a friend.
I installed the Power Duals Headpipes, along with Monster Oval Slip-ons and a Cobra Fi2000. I found a good improvement in performance, sound, less heat and did not see a noticeable drop in mileage. The installation was not difficult and the instructions are simple to follow.I would recommend this item to a friend.
lets talk class,product knowledge..no ah ah just facts instructions no other order needed ,fast service for headers and monster rounds another set of 2to one monster step up, on two streetglides!!! the dyno was super results, power fast throttle response,plush price on all products we have bought!!! for us old school vets we expect the best service. thanks dennis kirk from us two brothers.I would recommend this item to a friend.
Great head pipes
Purchased power dual head pipes and V&H Monster rounds. Both items arrived on time, and were well packaged and undamaged. I took my time installing the pipes and slip-ons. I just followed the instructions and it was pretty easy. The only tricky part is installing the heat shield over the crossover chamber. It was a little time consuming to get the seams tight. The only negative comment I have is the pictures in the instruction sheet. They were low quality and pretty much useless. I also purchased a Stage One intake and a HD Screamin Eagle Supertuner, which my dealer installed. Very happy with the look, sound, and improved performance. This was my first time dealing with Dennis Kirk, and I would absolutely use them again. Competitive prices, and very easy to deal with.I would recommend this item to a friend.
They look and sound great! Install was a little difficult as fit isnt perfect and lack of some direction. Ensure you tighten X heat shield last as if you do it any other time you risk scratching the others.I would recommend this item to a friend.
great power gains,nice sound,overall best pipe for flhx.I would recommend this item to a friend.
I would recommend this item to a friend.
bought these along with monster ovals. good fit and finish.I would recommend this item to a friend.
Instructions and Media for Vance & Hines Power Duals Head Pipes - 16759
|Product Info: Vance & Hines Power Duals||Instructional Video||0:22|