Dennis Kirk Inc.
Search Within
Ride Search
Top 3 Product Matches

FP3 Fuelpak - 66007

  • Part #:
    2009620
  • Mfg Part #:
    66007
  • OEM/Ref#:
1 / 5

FP3 Fuelpak - 66007

  • Part #:
    2009620
  • Mfg Part #:
    66007
  • OEM/Ref#:
Price: $399.99
Make sure this fits your ride
loading...
Ships Free
In Stock - 10+ on Hand

Ships Today!
Order in the next
0 5
HR
2 4
MIN
4 6
SEC
Vance & Hines FP3 Fuelpak - 66007

A revolutionary fuel manager models using the HDLAN system

  • With a wireless Bluetooth® connection to any iPhone® or Android smartphone, Fuelpak FP3 uses Flash technology to recalibrate engine parameters and mapping for exhaust systems and other performance upgrades you can download from Vance & Hines' expansive library of calibrations
  • Standard Autotune feature, makes use of all factory sensors to add another layer of precision tuning for specific requirements, whether tuning for unique components or different grades of fuel
  • With the Fuelpak FP3 module plugged-in, Live Sensor Data can be viewed through the smartphone to display speed, RPM, cylinder head temperature, voltage, gear selection and other vital information
  • Made in the U.S.A.

 

 



Included Items:

(1) Fuel injection module W/(1) 4 pin female connector

Instructions



The Air Resources Board (ARB) does not permit the use of aftermarket emission-related parts that alter the air/fuel ratio of an emission-controlled vehicle. Due to these legal restrictions this part cannot be shipped to California.

Specifications
Part #: 2009620
Mfg #: 66007
Type Fuel Injection Module
Units Each
Weight 0.35 lbs
Alternate/OEM Part Number(s):
10202538
Resources & Manuals
Fitment for Vance & Hines FP3 Fuelpak - 66007

Part 2009620 fits the following machines

Harley-Davidson
  • Dyna Fat Bob - FXDF 2009-2011
  • Dyna Fat Bob (EFI) - FXDF 2008
  • Dyna Low Rider - FXDL 2009
  • Dyna Low Rider (EFI) -FXDL 2007-2008
  • Dyna Street Bob - FXDB 2009-2011
  • Dyna Street Bob (EFI) - FXDB 2007-2008
  • Dyna Super Glide - FXD 2009-2010
  • Dyna Super Glide (EFI) - FXD 2007-2008
  • Dyna Super Glide Custom - FXDC 2009-2011
  • Dyna Super Glide Custom (EFI) - FXDC 2007-2008
  • Dyna Wide Glide - FXDWG 2010-2011
  • Dyna Wide Glide (EFI) - FXDWG 2007-2008
  • Electra Glide Classic - FLHTC 2009-2013
  • Electra Glide Classic (EFI) - FLHTC 2007-2008
  • Electra Glide Standard - FLHT 2009
  • Electra Glide Standard (EFI) - FLHT 2007-2008
  • Electra Glide Ultra Classic - FLHTCU 2009-2013
  • Electra Glide Ultra Classic (EFI) - FLHTCU 2007-2008
  • Electra Glide Ultra Limited - FLHTK 2010-2013
  • Heritage Softail Classic - FLSTC 2009-2010
  • Heritage Softail Classic (EFI) - FLSTC 2007-2008
  • Road Glide - FLTR 2009
  • Road Glide (EFI) - FLTR 2007-2008
  • Road Glide Custom - FLTRX 2010-2013
  • Road Glide Ultra - FLTRU 2011-2013
  • Road King - FLHR 2009-2013
  • Road King (EFI) - FLHR 2007-2008
  • Road King Classic - FLHRC 2009-2013
  • Road King Classic (EFI) - FLHRC 2007-2008
  • Road King Custom (EFI) - FLHRS 2007
  • Softail Cross Bones - FLSTSB 2009-2010
  • Softail Cross Bones (EFI) - FLSTSB 2008
  • Softail Custom - FXSTC 2009-2010
  • Softail Custom (EFI) - FXSTC 2007-2008
  • Softail Deluxe - FLSTN 2009-2010
  • Softail Deluxe (EFI) - FLSTN 2007-2008
  • Softail Deuce (EFI) - FXSTD 2007
  • Softail Fat Boy - FLSTF 2009-2010
  • Softail Fat Boy (EFI) - FLSTF 2007-2008
  • Softail Fat Boy Lo - FLSTFB 2010
  • Softail Night Train - FXSTB 2009
  • Softail Night Train (EFI) - FXSTB 2007-2008
  • Softail Rocker - FXCW 2009
  • Softail Rocker (EFI) - FXCW 2008
  • Softail Rocker C - FXCWC 2009-2010
  • Softail Rocker C (EFI) - FXCWC 2008
  • Softail Springer Classic (EFI) - FLSTSC 2007
  • Softail Standard (EFI) - FXST 2007
  • Sportster - XR 1200 2009-2010
  • Sportster - XR 1200X 2011-2012
  • Sportster (EFI) - XL 883 2007-2008
  • Sportster (EFI) - XL 883R 2007
  • Sportster Custom - XL 1200C 2009-2013
  • Sportster Custom - XL 883C 2009
  • Sportster Custom (EFI) - XL 1200C 2007-2008
  • Sportster Custom (EFI) - XL 883C 2007-2008
  • Sportster Forty-Eight - XL 1200X 2010-2013
  • Sportster Iron - XL 883N 2009-2013
  • Sportster Low - XL 1200L 2009-2011
  • Sportster Low - XL 883L 2009-2010
  • Sportster Low (EFI) - XL 1200L 2007-2008
  • Sportster Low (EFI) - XL 883L 2007-2008
  • Sportster Nightster - XL 1200N 2009-2012
  • Sportster Nightster (EFI) - XL 1200N 2007-2008
  • Sportster Roadster (EFI) - XL 1200R 2007-2008
  • Sportster Seventy Two - XL 1200V 2012-2013
  • Sportster SuperLow - XL 883L 2011-2013
  • Street Glide - FLHX 2009-2013
  • Street Glide (EFI) - FLHX 2007-2008
  • Street Glide Trike - FLHXXX 2010-2011
Reviews & Questions
Start typing your question and we'll check if it was already asked and answered. Learn More
Browse 10 questions Browse 10 questions and 63 answers
Can this unit be used on more than one bike same year same engine ?
Emilio S on Nov 27, 2017
BEST ANSWER: no.. its locked into the vin it's originally programmed into. once you use it its on that machine.. might as well put a huge bolt through the center of the device and screw it to the frame.. don't do that. Its actually a great and handy thing to have on your bike though. it's basically an on board, dyno.
does it work with any exhaust system ?
chris on Aug 4, 2016
BEST ANSWER: From what I can tell the answer is mostly yes. When you call up the app you go through exhaust choices with the default being stock. As I was using V&H mufflers I didn't go any further although there were a couple of other manufacturers listed. It will work with stock headers, stock headers that have been de-catted, true duals and cross-over duals. If your mufflers are not listed, you pick something that is close in baffle design and then run the "auto-tune" feature to fine tune your set up. Even though I was using V&H mufflers my set up was a little different (fiber glass packing in the mufflers and modified stock air cleaner) so after I flashed the canned map I ran the auto tune (takes about 3 hours) and now the bike runs even better- increased low-end torque, great mid-range and a little more on top end over the canned map. I would suggest you go on V&H web site and e-mail them your specific question. They will answer within a day and it beats hanging on the phone on hold for 30 minutes waiting for a tech to speak to. By the way, if it means anything, I heartily recommend this product. No beating your engine to death on a dyno to get a perfect tune. It also has 5 different throttle profiles you can choose from to quicken your throttle response and it raised the RPM cut-off to 5,800 RPM. Good luck.
best cam fuelpak 3 works with?
A shopper on Dec 3, 2016
BEST ANSWER: I own a 2011 Street Glide 103 .I installed Woods 555 cam due to not having to do any head work. With the addition of the V&H Fuelpak 3,V&H H2O Breather & V&H X exhaust & Freedom 41/2 mufflers . My bike runs off the charts . It is a beast !! Hope this helps
Do I have to have a smartphone to use this?
hiwayman on Sep 11, 2018
BEST ANSWER: You can borrow one to set everything up and flash the map. After that you can actually take it off and put it away until the next upgrade.
Will it adjust idle rpm?
Michael K on Mar 31, 2019
BEST ANSWER: yes, As soon as you flash the computer on your bike with the parameters that are listed on the fuelpak it will adjust all of the settings for riding conditions. I have used several in the past on different Harleys and have never had a problem. As a matter of fact I am about to put one on my new FLHTK. Hope that helps
Are there problems with this ?
A shopper on Aug 15, 2018
BEST ANSWER: My bike had the other Vance and Hines fuel management system on it and it would pop back far I installed the FP3 fuel pack in the bike runs perfect I recommend itEnter an answer to this question.
Can this be used if I have no 02 sensors?
A shopper on Aug 15, 2017
BEST ANSWER: I am almost 100% sure it will work. The FP3 works off the bike VIN number, so it will know what the bike came with from the factory. That said it will know not to look for them or if it had them it will know to look for them. Yeah you will be ok.
Can I use the fuel pack 3 work with cfr exhaust?
Hammer on Mar 19, 2018
BEST ANSWER: Yes
Will the fuel pack 3 work with cfr exhaust?
A shopper on Mar 19, 2018
BEST ANSWER: I don't know what a cfr exhaust is, but have this to say about FP3. The directions are a little vague in my opinion and you have to read all the frequently asked questions etc. I have a a standard brand exhaust, high flow intake and it has a little issue with that, BUT you can connect to Vance & Hines tech staff directly while you have the FP3 connected to your bike. The only problem is they are only open during normal working hours, and I have been so busy I have never had a day off to call them. I would just suggest calling them to get a definitive answer.
I know. I’m a dinosaur.
I don’t have a smart phone but do have an iPod
Anyone? Will this work in the garage with WiFi? To get programmed.
Or is it used on the road?
Anyone?
A shopper on Apr 7, 2019
BEST ANSWER: It needs bluetooth to program
4.5 / 5.0
28 Reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
20
5
0
2
1
Finish
4.7 / 5
Fit
4.7 / 5
Quality
4.7 / 5
Value
4.4 / 5
Would you recommend this product?
Yes (26)
No (2)
Finish
5 / 5
Fit
5 / 5
Quality
5 / 5
Value
5 / 5
Would you recommend this product?
Yes
FP3
Super easy to install. Only needed to remove side cover on 2011 Road King Classic. Less than 5 minutes sync with my Galazy 7, to download firmware and identify map for my set up. Does a re map of your bike. You don't need to keep it attached to the bike. ALL pre ignition ping went away! Paired with V&H slip ons. Bike runs better than it ever has. Definitely recommend!! It will allow me to re map again and again as I make future modifications to the bike.
October 18, 2016
Purchased
over 3 years ago
Finish
5 / 5
Fit
5 / 5
Quality
5 / 5
Value
5 / 5
Would you recommend this product?
Yes
Well worth the $$
V&H has made it so easy to tune your bike. I added pipes and an air cleaner so I needed this tuner. I'might not super tech savvy but this was simple. Follow the instructions and it takes maybe 5 minutes. Bike runs great! I was planning on having to use the auto tune to fine tune it but man...the thing runs perfect straight off the preloaded tune!
October 14, 2016
Purchased
over 3 years ago
Finish
5 / 5
Fit
5 / 5
Quality
5 / 5
Value
4 / 5
Would you recommend this product?
Yes
Great add.
Great product. S&S dual head vance and hines monster rounds stage 1 air intake fresh plugs E3s coil packs. FP3 Install and setup was quick and simple step by step prompts.
Downloaded stock program. You feel the the difference. Throttle response and going through the gears. Hold on tight...
July 20, 2016
Purchased
over 3 years ago
Finish
5 / 5
Fit
5 / 5
Quality
5 / 5
Value
5 / 5
Would you recommend this product?
Yes
Beast
They don't have online maps for performance cams but the Auto Tune feature and the guys at Vance and Hines used the data collected and made a custom map for my bike. It runs like a beast! Love it.
February 10, 2017
Purchased
over 3 years ago
Finish
4 / 5
Fit
5 / 5
Quality
4 / 5
Value
4 / 5
Would you recommend this product?
Yes
Rough start, but works great now
Had a very difficult time getting this unit to communicate to my smart phone. Instructions are vague, and not very helpful. Just remember to have your thumb switch on, or you will not connect. That little tip is not on the website, or in the instructions. The list of exhaust systems are just V&H exhausts. So you have to "guess" at which V&H exhaust is closest to what you have, and hope it works. I downloaded a map, and ran auto tune a few times. Runs great now, starts right away. Pulls hard through all 6 gears. Engine still gets real hot though. This unit updates the rev limit to 6200, and gives you the capability to take the throttle by wire deadband out as well. The last auto tuner I had (not V&H, named after a snake) needed to be left on the bike but was not weatherproof, so it got water in it, and died while out on a ride. $500 down the drain. I disconnected this unit and put it in the trunk to keep it safe.
August 19, 2016
Peoria, IL
Finish
5 / 5
Fit
5 / 5
Quality
5 / 5
Value
5 / 5
Would you recommend this product?
Yes
Very fast delivery. The product is great. I tune my bike with this. The device is very easy to use just as advertised. Vance & Hines fuel pack is the way to go.
November 19, 2016
Purchased
over 3 years ago
Finish
5 / 5
Fit
5 / 5
Quality
3 / 5
Value
1 / 5
Would you recommend this product?
Yes
Autotune not working for 08 Hd ultra
Bought this turner specifically for its autotune capabilities. I have an 08 Harley-Davidson Ultra Classic and loading a map was no problem but will
Not function correctly when autotuning. Will only partially learn but no green cells. This is a problem for 08 Harley-Davidsons and im
Not the only person with this problem with Autotune( search Hdforums)We was able to run autotune by changing O2 voltage but recent updates now made that option useless because will Not even autotune even after changing voltage. If you have a 08 HD I would wait until this problem is resolved before attempting to buy because $400 is alot for a product that wont do what it claims to do. Customer service is trying to resolve but this has been an ongoing issue for over 7 months and still no fix. If not for autotune issues I would be 5 Star happy but im
More aggrevated on what seems like $400 waste as of now
May 10, 2018
South Salem, OH
Finish
1 / 5
Fit
1 / 5
Quality
1 / 5
Value
1 / 5
Would you recommend this product?
No
Customer Support from Vance and Hines Suck
paid $400 for the FP3 and when I had my 2007 Electra Glide upgraded with the 103 Big Bore Stage IV kit Vance and Hines was not very supportive of providing or creating a map to put in my Bike. The dealer worked for over a month with Vance and Hines and they could not fix the fuel to air ratio. Ended up going with a different tuner.
November 10, 2016
Purchased
over 3 years ago
Finish
5 / 5
Fit
5 / 5
Quality
5 / 5
Value
5 / 5
Would you recommend this product?
Yes
Noticeable increase in HP with Arlen Ness big sucker. 09 RKC. Set throttle to aggressive take off like a bat out of hell.
April 27, 2018
Purchased
1 year ago
Finish
5 / 5
Fit
5 / 5
Quality
5 / 5
Value
5 / 5
Would you recommend this product?
Yes
I'm glad that I bought the FP3 it's completely change my bike well worth the money Write your review here. It must be at least 1 characters long. Consider whether you would recommend this product and what you like or dislike about it.
August 9, 2017
Independence , MO
Purchased
over 2 years ago
Ride:
FXDWG wide glide