You May Also Be Interested In
Part #: 264183 Mfg Part #: 22899Other People Bought
Part #: H26359 Mfg Part #: 17048-98Other People Bought
NOTE: 86-06 models require O2 sensor port plugs Part No. 44-03276
NOTE: Not all products are legal for sale or use on pollution controlled vehicles. Check your local laws and manufacturer's information.
(1) Front head pipe
(1) Rear head pipe
(1) Front heat shield
(1) Rear heat shield
(1) Front muffler heat shield
(1) Rear muffler heat shield
(5) #20 Hose clamps
(4) #28 Hose clamps
(2) Nut plates
(2) 3/8 x 3/4 Flange bolts
(4) 5/16 x 5/8 in. Flange bolts
(1) 3/8 x 2-1/2 in. Allen bolt
(1) Nylon cable tie
For the best performance, A free-flowing air cleaner and adjustable fuel management system is recommended with this pipe.
Recommended Vance & Hines fuel management module: Fuel Pak FP3 (part number 2001886) For CAN Bus models only (Touring, Softail, Dyna and Sportster). Not compatible with V-Rod models
There is no warranty on exhaust pipes and mufflers with regard to any discoloration. Discoloration (bluing) is the result of tuning characteristics, cam timing, carburetor jetting, overheating, etc. and is not caused by defective manufacturing. See lubrication products for products that will help prevent or remove bluing.
The Air Resources Board (ARB) does not permit the use of aftermarket emission-related parts that alter the air/fuel ratio of an emission-controlled vehicle. Due to these legal restrictions this part cannot be shipped to California.
|Color - Primary||Chrome|
Part 4401505 fits the following machines