|The Ninja 650 is one of the most versatile bikes on the market! Unleash your 650s true potential with a Two Brothers Racing performance exhaust system! You will notice the additional 7.5 raw hp and 10k rpm added to your bike by simply installing a TBR exhaust. You will also notice 4 ft. lbs. of torque at 5k rpm and drop 11 lbs of weight over stock. Pure performance gains are seen and felt in every part of the power-band.
Containing all this extra muscle is Two Brothers trademarked V.A.L.E.™ connection system with X-Lite™ retaining ring and premium M2 Muffler featuring our signature Cast Magnesium End Cap. This system also comes with a factory pre-installed P1 PowerTip™ noise suppressor.
Peak HP: Stock-67.86 hp TBR-71.74 hp Difference-+3.88 hp
Peak Torque: Stock-46.44 ft-lbs TBR-47.12 ft-lbs Difference-+0.68 ft-lbs
Weight: Stock-17.50 lbs. TBR-6 lbs. Difference- -11.5 lbs.
Catalyst: Stock-yes TBR-no
O2 Sensor: Stock-no TBR-no Difference-none
(1) Carbon fiber slip-on muffler with removable end cap
(1) Header pipe with flanges
(1) Aluminium muffler bracket
(1) Aluminium X-Ring kit (2 Halves)
(1) Muffler clamp with rubber liner
(4) 6mm-1.00 x 20mm Socket cap head bolts
(4) 6mm Split lock washers
(1) Allen wrench
(1) Torx wrench
(3) 8mm-1.25 x 30mm Socket cap head bolts
(1) 8mm-1.25 x 15mm Flange hex head bolt
(4) 8mm-1.25 Serrated flange hex nuts
(1) 18mm O2 Sensor plug
(1) 18mm-12mm O2 Sensor adapter
(1) 18mm Copper washer
The Air Resources Board (ARB) does not permit the use of aftermarket emission-related parts that alter the air/fuel ratio of an emission-controlled vehicle. Due to these legal restrictions this part cannot be shipped to California.
|Color - Primary||Black|
Part 4408030 fits the following machines