Travelrite Travelrack Cycle Carrier
- Part #: 55841
- Manufacturer Part #: 06046
This item is no longer available
Overview of Travelrite Travelrack Cycle Carrier
- Specifically for Class III hitches
- Made with aluminum; rails are light and store easily
- Two tiedowns and it is firmly in place
- Hauls more than the design limit of class III hitches; rated for 400 lbs.
NOTE: The tongue weight of a receiver type hitch is rated at the distance the ball normally is from the end of the receiver. Most carriers of this type are about double that distance so the load rating is normally reduced by 1/2. (500 lb. rated hitches will carry approximately 250 lbs.) For questions, contact your hitch manufacturer.
(6) 5/16 ID x 1-1/2 OD x 1/8 in. thick fender washers
(6) 5/16-18 x 1 in. hex head bolts
(6) 5/16 in. nyloc nuts
(1) Hitch extension
(1) Cycle carrier
(1) Wheel stop
(1) 1/2 in. Lock washer
(1) 1/2 in. Hitch pin
(1) 1/2 in. Hex nut
Specs for Travelrite Travelrack Cycle Carrier
Reviews for Travelrite Travelrack Cycle Carrier
There are no customer reviews for this item yet.
Instructions and Media for Travelrite Travelrack Cycle Carrier
|Instructions - PDF||Instructional PDF|