TrailTech KickStand 54000WR - DK#507664
The pre-owned 2005 Yamaha YZ250F that I recently, purchased has a ground to frame clearance of 10.5 inches; this 15.5 inch Trail Tech Kick Stand, (Trail Tech Kick Stand 54000WR - DK part #507664), was much, too, long for the YZ. I know that Trail Tech makes a 13.5 inch SuperMotard model, but I could only, find that model on Trail Tech's web site; (and this model would have also, been too, long); so I purchased this 15.5 inch model, here from DK. The seven eighths inch diameter, kick stand is 'beefier' than I expected, as the photos made it appear, to me, that it would be of a smaller diameter. The hardware included, (allowing it to be installed on a Suzuki, Kawasaki and the YZ), made it simple and easy to install, once I drilled a nine sixteenths inch hole, (to allow for the Kick Stand's Foot), deep enough to allow for my cutting off 4 inches of the aluminum, kick stand. It was a bit tough to remove and replace the foot inside the kick stand; it is a very, tight fit; and plastic foot appears to made of a very, durable, tough plastic. I have not used the kick stand out in the 'real world', yet, but I feel it will work well. I would recommend this Trail Tech Kick Stand. Do a bit of measuring before your purchase and be prepared that you might, just, have to modify the kick stand's length.