Dennis Kirk Inc.
Legendary Service... Ask Your Friends - Since 1969
Need Assistance?
Over 150K Powersport Items - In-Stock and ready to ship today! View tires, apparel, helmets, exhaust and more!

Thunderheader Racing Products 2 into 1 High Performance Exhaust System - 1057

  • Part #: 251460
  • Manufacturer Part #: 1057

MSRP Price: $730.00

Our Price: $657.00

You Save:
$73.00 (10%)

Overview of Thunderheader Racing Products 2 into 1 High Performance Exhaust System - 1057

  • ThunderHeader head pipes have been tuned to the proper length and diameter to produce maximum horsepower and a excellent torque curve
  • A patented collector is used
  • The collector is designed to direct spent gases through four acoustical dampening chambers
  • The flow director serves a multi-task function: directs outgoing flow through four acoustical dampening chambers creating a spiral motion upon exiting to atmosphere and it also forms a pyramidal shaped anti-revision trap to minimize the amount of air rushing in
  • In conjunction with the flow director, a diffuser shroud is attached to the reverse cone, this patented device is designed to defuse the air rushing in as the pressure inside of the system becomes equal to atmosphere

Included Items:
(1) Header
(2) 5/16-18 x 1-1/4 Hex Bolts
(2) 5/16 Plain Washer
(2) 5/16 Lock Washers
(2) 5/16-18 Nut
(2) 3/8-16 x 3/4 Hex Bolts
(2) 3/8 Plain Washers
(1) Rear Support Bracket

Not all products are legal for sale or use on pollution controlled vehicles. Check your local laws and the manufacturers information

There is no warranty on exhaust pipes and mufflers with regard to any discoloration. Discoloration (bluing) is the result of tuning characteristics, cam timing, carburetor jetting, overheating, etc., and is not caused by defective manufacturing. See the CHEMS/LUBES section for products that will help prevent or remove bluing.

Installation of a new exhaust system may change your motorcycles fuel-air mixture requirements. Please consult the exhaust manufacturer directly with questions regarding any modifications that may need to be made during, or after, installing their product. If a jet kit or fuel processor is recommended, see the FUEL/INTAKE section

The Air Resources Board (ARB) does not permit the use of aftermarket emission-related parts that alter the air/fuel ratio of an emission-controlled vehicle. Due to these legal restrictions this part cannot be shipped to California.

Specs for Thunderheader Racing Products 2 into 1 High Performance Exhaust System - 1057

Color - Primary Chrome
Finish Chrome
Style - Exhaust Tip Tapered Tip
Type - Exhaust 2-Into-1 System
Units Each
Weight 19.00 lbs

Specs for Thunderheader Racing Products 2 into 1 High Performance Exhaust System - 1057

Color - Primary Chrome
Finish Chrome
Style - Exhaust Tip Tapered Tip
Type - Exhaust 2-Into-1 System
Units Each
Weight 19.00 lbs

Fitment for Thunderheader Racing Products 2 into 1 High Performance Exhaust System - 1057

See if this part fits your ride

Part 251460 fits the following machines

Harley-Davidson
  • 2011 Harley-Davidson Heritage Softail Classic - FLSTC
  • 2010 Harley-Davidson Heritage Softail Classic - FLSTC
  • 2009 Harley-Davidson Heritage Softail Classic - FLSTC
  • 2008 Harley-Davidson Heritage Softail Classic (EFI) - FLSTC
  • 2007 Harley-Davidson Heritage Softail Classic (EFI) - FLSTC
  • 2011 Harley-Davidson Softail Cross Bones - FLSTSB
  • 2010 Harley-Davidson Softail Cross Bones - FLSTSB
  • 2009 Harley-Davidson Softail Cross Bones - FLSTSB
  • 2008 Harley-Davidson Softail Cross Bones - FLSTSB
  • 2009 Harley-Davidson Softail Custom - FXSTC
  • 2008 Harley-Davidson Softail Custom (EFI) - FXSTC
  • 2007 Harley-Davidson Softail Custom (EFI) - FXSTC
  • 2011 Harley-Davidson Softail Deluxe - FLSTN
  • 2010 Harley-Davidson Softail Deluxe - FLSTN
  • 2009 Harley-Davidson Softail Deluxe - FLSTN
  • 2008 Harley-Davidson Softail Deluxe (EFI) - FLSTN
  • 2007 Harley-Davidson Softail Deluxe (EFI) - FLSTN
  • 2007 Harley-Davidson Softail Deuce (EFI) - FXSTD
  • 2011 Harley-Davidson Softail Fat Boy - FLSTF
  • 2010 Harley-Davidson Softail Fat Boy - FLSTF
  • 2009 Harley-Davidson Softail Fat Boy - FLSTF
  • 2008 Harley-Davidson Softail Fat Boy (EFI) - FLSTF
  • 2007 Harley-Davidson Softail Fat Boy (EFI) - FLSTF
  • 2011 Harley-Davidson Softail Fat Boy Lo - FLSTFB
  • 2010 Harley-Davidson Softail Fat Boy Lo - FLSTFB
  • 2009 Harley-Davidson Softail Night Train - FXSTB
  • 2008 Harley-Davidson Softail Night Train (EFI) - FXSTB
  • 2007 Harley-Davidson Softail Night Train (EFI) - FXSTB
  • 2007 Harley-Davidson Softail Springer Classic (EFI) - FLSTSC
  • 2007 Harley-Davidson Softail Standard (EFI) - FXST
4.3 / 5.0
12 Reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
7
4
0
0
1
Finish
4.7 / 5
Performance
4.9 / 5
Finish
4 / 5
Performance
5 / 5
instant horsepower
best addition to my motor yet..horsepower increase you can feel in the seat of your pants ...product was expertly packaged and arrived in perfect condition .....
January 18, 2011
Finish
5 / 5
Performance
5 / 5
The right pipe-apology long review
The right sound, easy to install, 10HP, 20FtLbs Torque bolt-on. Get the shield kit or cook your leg.
Yes it's a bit louder than VH duals. But a deeper, respectful, commanding duntDunt. Not the obnoxious blatBlat from the BigRadius 2-1.
So I got a free Dynotune from a dealer, who dyno'd it the next week with only this $650 mod (with shields). From 94HP/104# torque to 104hp/124#torque.
Provides the performance I needed from stock on my '09 FXDFSE. Dynotune is a must from stock-it turned my skoot to a monster.
Buy 2 rear tires, cause they won't last.
Comes with O2 ports, perfect fitment, mounting bracket and all you need minus the head port gasket (why not? -it's right there and $5 pair).
25 mins to install, no fancy tools except a swivel socket extension. And ale-pale Ale.
January 28, 2014
Finish
4 / 5
Performance
5 / 5
No Review Title Entered By User
Need longer bolts to mount bracket to transmission
Tight fit between pipe and foot-board - slotted hole would be helpful
January 19, 2011
Finish
5 / 5
Performance
5 / 5
Great addition
I recently purchased a 2001 Dyna Low rider with 7000 miles from a great previous owner that did very little to the bike but maintain it. He did put a Mikuni carb on it. My plan was to do the bike up right and quick..two weeks...but tasteful. I added the intake and cleaner and quite a few other items to dress the bike up to my style. Most importantly I waited until last to do the exhaust, so I called Mikuni and talked to Steve...told him what I was doing and asked for his advice. Afterwards, given my style I was going for and the performance I was seeking, he offered the Thunderheader as a choice. He explained that since I lowered the bike and wanted performance, this was a good choice. I forgot to mention, this is my first bike, and I did all the work and upgrading myself. This pipe couldn't have fit better and easier. Awesome piece of equipment!
July 11, 2013
Finish
4 / 5
Performance
5 / 5
wanna make your bike sound like a drag bike?
very good investment for the price. It is only loud when you really twist the wick. Really increased the torque curve.At 65 or above you will really feel the push all the way up to where you think you are going to take off.At 120 you still can feel the torque pushing you back.
January 25, 2012
Finish
5 / 5
Performance
5 / 5
Thunderheader Exhaust
Love the way this exhaust sounds on my fatboy. My husband has one on his roadking and we are very impressed!
January 6, 2012
Finish
5 / 5
Performance
5 / 5
No Review Title Entered By User
No Review Text Entered By User
May 18, 2010
Finish
5 / 5
Performance
5 / 5
Rumble
Just what I had heard, great sound and looks great. Fast shipping and great communication
December 5, 2015
Finish
5 / 5
Performance
5 / 5
Great Pipes
Looks ands sounds great. It is bolt on horsepower for sure.
October 23, 2012
Finish
5 / 5
Performance
4 / 5
No Review Title Entered By User
One of the easiest pipes I've installed. (and I've installed many) It has that one and only thunderheader sound. Very good finish, I would recommend to others.
February 28, 2012
Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!

Instructions and Manuals for Thunderheader Racing Products 2 into 1 High Performance Exhaust System - 1057

You May Also Be Interested In