WEATHERPROOF DESULFATING BATTERY CHARGER/MAINTAINER
Special features in CAN-bus program:
Automatic KEY-LESS activation and continued maintenance until charger is disconnected.
Safe low voltage pulse desulphation.
SAFE: No risk of overcharging. Totally safe for vehicle electronics. Sparks suppressed. Safe for long-term battery maintenance. Automatic shut-down if short-circuited or battery disconnected. 3-year limited replacement warranty.
- Saves neglected, deep-discharged batteries that other smart chargers can't and is ideal for all 12V AGM, GEL and standard filler cap batteries from 3 to 50aH
- Compatible with either conventional or CAN-bus electrical systems and includes IP64 weatherproof sealed enclosure with built-in mounting option
- Switch between STANDARD or CAN-bus programs with a simple 5-step procedure (charger comes pre-programmed STANDARD for conventional electrical systems)
- You can switch programs as many times as you would like
- LED indication confirms the CAN-bus program is active
- Previously when the battery in a CAN-bus system was fully charged and a charger moved into the maintenance program, the CAN-bus system would automatically disconnect the charging circuit and require intervention from the user to reactivate
- You can now automatically charge and maintain CAN-bus equipped systems via their convenient external 12V charging port, without use of the ignition key or reactivation (CAN-bus connection cord sold separately, PART NO. 28-3447
- All vital battery information is displayed by a control panel with 10 LEDs
- SAE weatherproof connections
- Cable bushings avoid insulation stress in ultra-cold temperatures
- Optimal maintenance of your battery during long-term storage, achieved by its gentle maintenance cycle which automatically allows the battery to rest for 30 minutes of each hour of the maintenance cycle while it remains connected
- Fused eyelet connector for permanent mounting and battery clip set for bench charging is included
The most ADVANCED & TRUSTED battery charger in power sports!
OptiMate 4 Dual Program includes two charging programs; program 1 is for direct charging of a battery, program 2 allows safe and unsupervised charging through a BMW motorcycle’s CAN-bus controlled 12V socket. OptiMate 4 Dual Program tests before & after charging and can recover a ‘dead-flat’ battery from as low as 0.5 Volts.
SAVE: Low Volt Start of 0.5V + 2-step* desulphation recovery (*1-step low volt pulse save during CAN-bus mode); CHARGING AMPS: 0.8A (constant current).
IDEAL FOR: STD, AGM & GEL 12V batteries from 3 – 50Ah.
USE: Indoor / Outdoor (lowest temperature: -40°F / -40°C); STYLE: Weatherproof case with wall mounts, with 6ft / 180cm AC supply lead and 6ft / 180cm charge lead ending in SAE connector. Weatherproof battery lead & standard battery clip set included.
INPUT: Global (100-240V 50-60Hz), high efficiency (CEC listed), fully sealed.