Supertrapp Quiet Series IDS 2 Silencer/Spark Arrestor - 611-5653
- Part #: 446128
- Manufacturer Part #: 611-5653
- MSRP Price: $389.00
- Our Price: $314.96
Overview of Supertrapp Quiet Series IDS 2 Silencer/Spark Arrestor - 611-5653
- The most compact 4-stroke exhaust on the market
- Eye-catching look
- Large opening for enhanced flow
- Weighs pounds less than stock
- Lightweight brushed aluminum body
- Silent Sport® packing is durable and efficient, protecting bodywork for exhaust heat and soot
- Tunable for sound and performance
- U.S. Forest Service approved spark arrestor
Rejetting is recommended with this exhaust
(1) Aluminum Muffler
(1) Middle Pipe
(12) Diffuser discs w/end cap/screws
(2) T-Bolt clamps
(2) Rubber bushings
(1) 3/4 in. Spacer
(2) 8mm Fender washers
(1) Retaining pin
(3) 1/4x1/2 in. Buttonhead allen bolts
(3) 1/4 in. Lock washers
(1) T-Handle allen wrench
(1) Allen wrench
(1) Tube Hi-Temp lube
There is no warranty on exhaust pipes and mufflers with regard to any discoloration. Discoloration (bluing) is caused by tuning characteristics, cam timing, carburetor jetting, over heating, etc. See the Chems/Lubes section for products that will help to prevent or remove the bluing.
|Type||Muffler/Silencer w/Spark Arrestor|
Specs for Supertrapp Quiet Series IDS 2 Silencer/Spark Arrestor - 611-5653
|Type||Muffler/Silencer w/Spark Arrestor|
Fitment for Supertrapp Quiet Series IDS 2 Silencer/Spark Arrestor - 611-5653
Part 446128 fits the following machines
|2009 Suzuki DR650SE|
|2008 Suzuki DR650SE|
|2007 Suzuki DR650SE|
|2006 Suzuki DR650SE|
|2005 Suzuki DR650SE|
|2004 Suzuki DR650SE|
|2003 Suzuki DR650SE|
|2002 Suzuki DR650SE|
|2001 Suzuki DR650SE|
|2000 Suzuki DR650SE|
|1999 Suzuki DR650SE|
|1998 Suzuki DR650SE|
|1997 Suzuki DR650SE|
|1996 Suzuki DR650SE|
Reviews for Supertrapp Quiet Series IDS 2 Silencer/Spark Arrestor - 611-5653
Great concept, but execution not so great
I've always liked the concept of Supertrapp adjustable disc design. However, with this kit the mid-pipe didn't fit. The welded bracket was not in the right place and was too high. I had to drill another hole in it to get it to fit. I also had to cut the mid-pipe to reduce the length where the muffler attached. But the worse thing is the disc bolts froze inside the captured nuts inside the muffler despite using the anti-seize provided and torqueing them properly. The first time I tried to remove the bolts to adjust the disc stack, (only after 80 miles of riding), the bolts froze in the captured nuts and two of the bolts stripped. Then when trying to replace with new bolts, one of them froze part way in and no matter how carefully I tried to coax it in or out gently, it eventually broke away the captured nut because they are just riveted in. I had to pull the core to get the bolt out and that too was messy as the packing didn't come out smoothly with it. The bolts and nuts for the discs are just too small and fragile. Plus on this model they only use 3 bolts instead of six, so if one breaks, you're left with only two bolts holding the discs. My feeling is if you are going to make tuning adjustments, you have to do it immediately and within the first few miles and use a ton of anti-seize. Don't expect to be able to make adjustments later on because the threads of the bolts are exposed inside the muffler and therefore exposed to corrosive exhaust gasses and will get coated with carbon. I couldn't believe after only 80 miles, they were already frozen in place. It's a bad and fragile design. I had a 4" Supertrapp previously with 6 bolt arrangement on another bike and didn't have this problem. I still like the concept, but I will have to come up with some other method of adjusting the discs if I want to do it down the road. The sound is louder than I'd like with 12 discs, but not intolerable. I gave it overall a "Good" rating because once you have it set where you want it, it's a nice can. But have to say I'm disappointed in the quality and flimsy execution of this kit for long term ability to make changes as you change performance aspects of the bike over time..I would recommend this item to a friend.
The most tunable system ever
Easy install. Nice fit. They provide EVERYTHING you need to set up the system. Since I'm in the process of setting up the carb with different jetting, the ability to add or remove discs to change back-pressure makes this the most adaptable, tunable slip-on system there is. Over the years I've used all the system types from straight through to chamber type, and there is nothing as tunable as the SuperTrapp discs. Mine is a spark arrester type, and is the "quiet" model. It's much, much mellower than the race version, and also much quieter than four other brands that I also have. BTW: I had to exchange item on my order, and DK's included UPS 'stick-on' labels made it a ten second drop-off. Nice.I would recommend this item to a friend.
GREAT PRODUCT !!!
I replaced an old style Supertrapp on my Yamaha Warrior. On the old unit I had to remove most of the disks to avoid getting a noise ticket. The new Supertrapp IDS is almost as quiet as the stock exaust with all the disks in and all the lost horsepower is back !!! I still have the great Supertrapp sound just not so much of it to get the cops after me. This is a great design. I am also very happy with the service I recieved from Dennis Kirk. The product showed up on time and as ordered.I would recommend this item to a friend.
Super Trapp IDS2 Quiet
on a "98 DR350SE. Comes w/ 12 discs, anything more than 7 creates quite a bark, not what I would consider "quiet" or even close. 7 discs does create a deep good tone though. Does it make more power? Who knows, I installed it at the same time as a jet kit & drilling 30 - 1/4" holes in the airbox. It was VERY lean to start with & definitely starts & runs better now. The whole system is 3 lbs lighter than the factory. It does NOT include the gasket between it & the head pipe.I would recommend this item to a friend.
The quality and performance is outstanding. The sound is thumper music.I would recommend this item to a friend.
Worth the Money.
The sound is just what I wanted and the performance increase is impressive. The installation was fairly easy, it just seemed alittle tighter than necessary, I had to use a rubber mallet to get the pipe sections all the way seated so the bolts lined up. Otherwise it is a great product that I would purchase again.I would recommend this item to a friend.
Instructions and Media for Supertrapp Quiet Series IDS 2 Silencer/Spark Arrestor - 611-5653
|Instructions - PDF||Instructional PDF|